Your last picture is showing temps. Which one is XSPC and which one is H100 ?
Readings at the time of posting.
0: HFB JOLOKIA : 725MHz 83C 100% 0.86V | 661.5G / 551.2Gh/s WU:7700.2/m A:4392305 R:4814 HW:1084
1: HFB FRUTESCE: 725MHz 71C 100% 0.87V | 471.7G / 547.7Gh/s WU:7652.2/m A:4367387 R:8278 HW:1210
JOLOKIA @ 83C is the Corsair H100i, with fan mods (2 x 1amp, ~150cmf server fans)
FRUTESCENS @ 71C is the XSPC Raystorm Kit. (with only 2 of the 3 server fans going atm)
The model of the server fans' Sunon - PMD1212PTB1-A(2).F.GN
Ambient temps out side the room is 10C atm and windows wide open. I need to new battery for the thermometer in the room. I'd say it's high 20s C if not 30C in the room.
Still slowly increasing the clocks and voltages. Was too rush before and had odd results. Taking my time now..
I did reapply the Thermal paste and re-attached the water heads to the Habanero boards. Swapped them over the 2nd time to see if there's much difference in the boards. No noticeable difference in performance after I switched the water heads on the boards. I assume both board are preforming relatively the same on stock settings.
Next up is making a fan attachment to the frame so I can attached fans to blow over the boards. Should have this done when the 2nd water head arrives in the next few days.
Cheers,
QG