Quote from: deepceleron on February 14, 2012, 12:31:05 AM

Quote from: Kohta on February 13, 2012, 07:19:35 PM

Quote from: deepceleron on February 13, 2012, 12:54:58 AM

-guide-

So i followed the guide and everything worked out, except i have 3 GPU's in this machine and now it's only recognizing 2 of them (the one's in crossfire) when i disable crossfire it will only 'see' one of the GPU's, also using Phoenix 1.7.x

-k phatk2 VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false
&
-k phatk VECTORS BFI_INT AGGRESSION=11 worksize=128 FASTLOOP=false

are 20MH/s slower than using SDK 2.3/CCC 12.1 per GPU (The onyl 2 it can see), in the device manager all of the GPU's are directed towards that folder.

I'm going to unfortunatly have to revert back and continue with 12.1/2.3

12.1/2.3 = 301MH/s
11.6 = 287MH/s

The third GPU is recognized in MSI Afterburner/Sapphire TRixx/GPU caps viewer/Windows Devices, but not GUIMiner as a usable device, i'm going to start up a thread quickly to see if i can get some information on CGMiner.

You have the wrong settings for your GPU for 11.6/2.4, and you were likely using 12.1/2.6 before, since 2.6 comes with that driver, gets installed in windows, and overrides whatever you thought you were running, and work OK with a smaller worksize.

-k phatk2 VECTORS AGGRESSION=12 worksize=256 FASTLOOP=false, plus underclock your GPU memory to 300Mhz or so. Remove the crossfire link if you are going to mine, and make sure each video card has a monitor connection (or dummy plug) plugged into it.

..or

Just install 12.1 (which installs it's SDK 2.6 runtimes), use the stock memory speeds, and with the latest Phoenix use:
-k phatk2 VECTORS4 AGGRESSION=12 WORKSIZE=64 FASTLOOP=False

Thanks Deep, i installed 12.1 again, with no SDK i have 1 set of devices which looks like this in GUIMiner (I tried to figure out how to run those other miners in Windows and it's a pain, i even asked for help and didn't get far, explained more at the end)

[0-0 Intel(R) Core (TM) i72600]
[1-0 Barts]
[1-1 Barts]
[1-2 Barts]
[1-3 Intel(R) Core (TM) i72600]
[1-4 Intel(R) Core (TM) i72600]
[1-5 Intel(R) Core (TM) i72600]
[1-6 Intel(R) Core (TM) i72600]
[1-7 Intel(R) Core (TM) i72600]
[1-8 Intel(R) Core (TM) i72600]
[1-9 Intel(R) Core (TM) i72600]

My Barts MH/s like this are ~278MH/s @ 950MHz

After Installing SDK 2.3 it looks more like this.

[0-0 Intel(R) Core (TM) i72600]
[1-0 Barts]
[1-1 Barts]
[1-2 Barts]
[1-3 Intel(R) Core (TM) i72600]
[2-0 Barts]
[2-1 Barts]
[2-2 Barts]
[2-3 Intel(R) Core (TM) i72600]

From what i can tell the first set of "Barts" is running on 2.3 which is what gives me the 301MH/s, the second set is 2.6 or whatever is in 12.1, which peaks at 278MH/s

Running the same flags at the same speed brought me to a solid 301MH/s using whatever Phoenix is in the August GUIMiner.

Now about other miners, i want to get away from GUIMiner since iv'e seen it's not being updated. But i use deepbit's pool since i started mining there back when it was much smaller than it is now and i try to stay loyal to one pool. The problem i'm running into is i can't find out how to get CGMiner (For example) to even recognize my GPU's, it sputs errors about not being able to initiate my GPU, the only real guides i found were for linux which doesn't help me at all, i already invested in system builder windows 7's and i'm going to use them, i can't figure out how to write a config file because many of the miners list examples that are not even in the format you would write it in! it's annoying to say the least, not everybody has programmer sense, your steps provided actually taught me that CCC and Driver Sweeper leave things behind which i now know if i ever have any issues with a driver not removing.

I was able to get the poclbm.py2exe to work after about an hour of "trying" different things to even connect to the pool.

So basically, i have reverted back to where i was when i started this thread, my entire intention was to install a higher SDK and use a different miner, but the down time in the last 48 hours has costed me big time, iv'e learned that the current SDK i have installed works extremly well with Phoenix in the GUIMiner, i have no clue how to set up or even get the actual phoenix miner running in windows.