Quote from: Birman on June 26, 2014, 01:21:22 PM

Quote from: NEO2012 on June 26, 2014, 01:10:23 PM

Quote from: Birman on June 26, 2014, 08:34:41 AM

Quote from: aasl on June 26, 2014, 08:05:14 AM

Quote from: Birman on June 26, 2014, 07:49:09 AM

Quote from: raskul on June 26, 2014, 07:13:22 AM

Quote from: jelin1984 on June 26, 2014, 07:03:47 AM

is ok 2 corsair ax 1200 i platinum?

that would be my PSU of choice. without having looked at the exact spec, i'd assume that would suffice to power your new Neptune.

Why need to use 2 1200W?
I think 1 1200(1300) and 1 850W is OK

if use 1x 1200w and 1x850w, how to connect to the 5 box + 1 controler?

1-st option - 2pc 1200W PSUs - one Psu for 3 boxes - another for 2 boxes + controller -> one 1200w PSU - work with 3 boxes
2-nd option - 3pc 850W PSUs - (one PSU for 2 boxes)x2 , another Psu for 1 box + controller -> one 850W PSU - work with 2 boxes

1300W+850w is OK
I'm with 1 1300w (3 boxes + controler) + 1 850W (2 boxes)

hey a cube draws minimum 400 watts up to 425w so u can barelly run 2 cubes on 850 if ur lucky and single rail

u need single rail evga 1300w g2 u run 3 cubes
and and a 900w -to 1000w second power suplly singel rail to run 2 cubes plus controller card

fallow as i said or u will burn:) is as simple like that

evga 1300w g2 =3 cubes single rail
900w =2cubes plus card -single rail

I'm not agree
1950W from the wall
this is 1950-10%=1755W from PSUs
1755w/5=351W per box from PSU (I think controler consumation is no high)

1300W PSU load is 1053W (+ a little for controler)
850PSU load is 702W

my total draw is close to 2100 so its safe to asume a 400waat avarage per cube and

use single rail 1200w - 1300w = 3 cubes evga 1300 w g2 im using - single rail
single rail 850 - 900 w = 2cube plus controller cooler master 1000 w im using - singlerail

its always good to be on the safe side:)