Quote from: racebyu on June 27, 2014, 03:03:16 AM

That might work, could be a reset if the blade gets locked up.
I remember the old ASIC blades also had a similar reset feature
if the unit became locked up during mining and power reset did
not work.

Quote from: pws328 on June 26, 2014, 07:16:31 PM

Quote from: Janezki on April 29, 2014, 05:16:41 AM

Just noticed that switch marked ASW100 - any info/idea/guess what's that for?

Hey guys, I'm hoping someone here can help me out with an issue I'm having with my blade. One of the boards isn't being recognized by my computer when I plug the USB cable in, but the other board is perfectly functional. I've tried pretty much everything I can think of to make sure it's not something I'm doing wrong, and it seems like the board is DOA.

I posted this questions in another section, and Wolfey2014 pointed me over here to see if anyone has had a similar issue. He also suggested I try hitting what may be a reset button, the one in the pic above. Did anyone ever try this with their blade, and if so, did it fix anything?

Thanks in advance, and if I get my blade working it seems like overclocking may be in my future! Grin

I'm not sure a reset will put it alive, but at least, it won't hurt.

You can also check voltage on the AME8805 converter that powers the stm103 chip.
I'll upload a pic with the test points and what you should read.
No need to power the blade except with the USB plug.