Quote from: adizzle on June 30, 2014, 12:01:16 PM

Hey all, can anyone point me in the right direction for information on rewiring a North American home to hold some Neppy's...my friend has a couple batch 2's and he wants to be ready..

Much obliged.

~thanks

Find out what kind of power panel, the breakers can be model specific.
Then for starters go to Home Depot or equivalent and ask the guy about 220V breakers.
Ask to look at a load center panel, or look in yours at home with cover removed.

If you don't know, best to pay for proper skillset!!!!!!!!!!!!!!!!!!!!!!
Burning down a house should be saved for special moments, not mining tinkering IMneverHO.
Wink

DO NOT TRY THIS AT HOME KIDS!

I made a TEMPORARY poor mans 240 outlet for emergency usage.

Get 2 appliance replacement cords and the outlet U need, plus a 12/3 extension cord or 2, and a box to hold it all.
Wire the black from 1 cord to one side of outlet, wire other black to other side of outlet.
The white wires are unused, put seperate wire nut on each.
Connect both cord grounds to outlet and box.

If the appliance cord plugs are plugged into same outlet, voltage at poor mans outlet will be 0 volts.
If you plug one of them into an outlet that is on a different 'leg' of your AC the poor mans outlet will measure 238v (or so)

If you do not have tools to measure voltage DO NOT BEGIN!

It's not really for poor men, the parts are expensive no matter what route you go.

YMMV