Quote from: TrekRider on July 01, 2014, 11:09:34 PM

Quote from: klondike_bar on June 30, 2014, 05:20:22 PM

Two alternative setups for the gigampz boards: you can fit 2 16awg wires per terminal if you need to balance larger loads. I sell both the 6" 18awg splitters and 24" 16awg leads in my signature link

This is what happens when you use adapters with thin wires unable to carry a load. notice this is an 8pin ATX to 6pin PCIe adapter that burnt up under 200w load, probably only a 22awg wire at best. it even melted into a nearby fan wire.

notice the difference between the burnt-out adapter and the 18awg y-splitter I sell. There is also a 16awg tip from the 24" cable visible, which is a little bit thicker again.

Think you've posted this in enough threads yet?

I updated my sales thread and thought that an example of some cord setups plus what cheap cables look like after burning through may be relevant to this thread. #miningrigfireporn