Quote from: mison on July 09, 2014, 02:17:32 PM

Quote from: GGin on July 01, 2014, 08:58:21 PM

Quote from: tobenary on July 01, 2014, 04:11:45 PM

Any help for 290 config file ?

X11 / X13 ?

Please share...

Sharing IS caring...

I'm sure it's not best configs, but they work stable for me
R9 290, AMD v14.6rc2 + AB for UV, sgminer v4.1.0

~5.1 Mh, t < 80 deg (gpu uv)

"kernel" : "x11mod",
"intensity" : "0",
"xintensity" : "50",
"rawintensity" : "0",
"worksize" : "64",
"gpu-threads" : "2",
"lookup-gap" : "0",
"thread-concurrency" : "8192",
"shaders" : "2560",
"gpu-engine" : "1000-1000",
"gpu-memclock" : "1200",
"gpu-fan" : "50-60",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"no-submit-stale" : true,
"no-pool-disable" : true,
"failover-only" : true,
"failover-switch-delay" : "60",
"queue" : "1",
"scan-time" : "7",
"shares" : "0",
"tcp-keepalive" : "30",
"expiry" : "28",
"log" : "5",
"kernel-path" : "/usr/local/bin",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"api-allow" : "W:127.0.0.1"

~3.6 Mh, t < 80 deg (gpu uv)

"kernel" : "x13mod",
"intensity" : "17",
"xintensity" : "0",
"rawintensity" : "0",
"worksize" : "64",
"gpu-threads" : "2",
"lookup-gap" : "0",
"thread-concurrency" : "8192",
"shaders" : "2560",
"gpu-engine" : "1000-1000",
"gpu-memclock" : "1200",
"gpu-fan" : "60-60",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "95",
"temp-hysteresis" : "3",
"no-submit-stale" : true,
"no-pool-disable" : true,
"failover-only" : true,
"failover-switch-delay" : "60",
"queue" : "1",
"scan-time" : "7",
"shares" : "0",
"tcp-keepalive" : "30",
"expiry" : "28",
"log" : "5",
"kernel-path" : "/usr/local/bin",
"api-listen" : true,
"api-port" : "4028",
"api-mcast-port" : "4028",
"api-allow" : "W:127.0.0.1"

this is most important for speed and stability
  for fine tuning

  <---
  <---
  <---
  <---
  <---

hope it will help Wink

I was try it on my R9 290 rig, but it did only about 2,5Mh at X13. It wrote something about some part of config did not loaded. Have someone similar issue? What API parameter mean? Why it want to connect to the network? I am using sgminer 4.1.0 without api and it working about 3,6Mh at x11 and 2,55Mh at x13.

look at this post: https://bitcointalk.org/index.php?topic=623409.msg7757878#msg7757878

api in my config mean that I use CGWatcher - highly recommend!
for to disable api you can remove this line: "api-listen" : true,

Intensity/Xintensity/rAwintensity - you must use one of them only for each card, so it doesn't matter if you will remove that you don't use or not.