Quote from: edonkey on July 18, 2014, 04:26:27 PM

Quote from: Red_Wolf_2 on July 18, 2014, 04:00:20 PM

This will enable the DHCP server. You don't want this. Instead change the protocol type from Static IP to DHCP Client and save and apply the changes.

Thanks for the info. I thought that that option looked suspect. That's why I asked in my first post if there was a DHCP Client option. Thanks for confirming that there is.

Quote from: Red_Wolf_2 on July 18, 2014, 04:00:20 PM

If anyone is interested, I'll put together a quick starter guide for anyone who wants to switch from the default settings to a dynamic assigned IP setup...

I think that I'm all set. But given that the set up is confusing, I think that it would be generally helpful to other people to keep them from messing up their units.

What an odd choice for Bitmain to expose all of this router functionality. It's more like setting up a firewall than a miner. Instead of suppressing this complexity and providing a mining appliance (which I suspect most people are interested in), they've exposed a bunch of stuff that people don't need.

The sense that I have is that under the hood the two blades are Ethernet devices and front end is a router for them. So I guess people could build out large scale farms made of many blades under one or more routers. Maybe in that case it would make sense to enable a DHCP server for the blades. But if anyone was building out that kind of infrastructure, I assume they'd be using their own router or firewall, not the one that comes with the S3.

So again; exposing this functionality is just an unnecessary complication. But they were probably in a rush to ship, so UI refinements were probably pretty low on the priority list Wink

No problems Tongue

The reason all the router functionality is exposed is that the OS is OpenWRT, which is designed primarily for use on wireless routers. You can do a heck of a lot with it on a good quality router, and in the case of the S3 the controller board is really little more than a specialised wifi router board with some extra circuitry to allow it to talk to some USB devices. This appears on a cursory glance to be wired directly to a PIC32 microcontroller which has some glorified firmware on it that does the actual talking to the ASICs. I'd imagine this wouldn't be dissimilar to how the older BFL gear worked, with a MCU to handle all the discussion and job handing between the ASICs, and converting it all into a nicer format that gets shunted across the USB serial port set up between the AR9331 and PIC.

The blades themselves don't seem to talk as ethernet devices, they need that PIC in there to handle things properly.
Could probably make the blades as PCI-e cards if they really wanted to...