Quote from: ftoole on July 22, 2014, 02:16:04 PM

Quote from: oskuro on July 22, 2014, 01:34:08 PM

Quote from: kingcolex on July 22, 2014, 01:33:06 PM

UTP Cat5E is enough.

u mean Cat5?. Cat5E is better and more expensive Cheesy

And any switch also will be enough i suppose

CAT 5 should be fine and any Switch. Please make sure it is a switch and not a hub if you buy it used. B\C if it is a Hub it will cause latency which will negatively affect your profitablity.
My 2 TH miner only uses at its peak like 16kbits. So even wireless B could work but then your issue with wireless comes to that wireless traffic runs like an ethernet network with a hub and you will have collisions that will cause good old latency.

Quote from: runlinux on July 22, 2014, 01:36:52 PM

If you want gigabit speeds to all your devices, you need Cat5E or better along with a gigabit switch. For most stuff at home, any gigabit switch will work. I have't had one die on me yet.

Be careful with GIGABit switches each port may be capable of gigabit speed but not all of the ports can do gigabit at the same time. you want to look at the Switching Capacity for the switch it should be at least 2gbs per port on the switch. In the home environment this isn't to big of a deal but if you what to have a media server in your home and stream high quality videos it can make a big difference.

ok thanks!