Quote from: avaughan4 on July 24, 2014, 02:33:08 AM

Quote from: Miramyn on July 23, 2014, 07:45:12 PM

You said that you had 2 orders for 1.2 machines (580 and 650), but mentioned only receiving 1 miner. Is that correct? What speed is the miner? How is it working?

Thanks for the update

Quote from: avaughan4 on July 21, 2014, 09:12:07 PM

I was not expecting a delivery this morning, since I gave up reading the forums and lost all hope, but DHL knocked on my door and handed me a box with a miner inside. I have no idea how much mining power it has since I was on my way out and there was no information either, but I will power it up when I get home and post my results. I originally placed 2 orders with AMT, 580 and 650. I received the Kits but those don't work anymore, the chips stopped working one by one. The kits of 2 x 1.2TH/s only yielded 540GH/s at first and then died off. I asked AMT for RMAs but never received an answer in the past 2 months. So when I received this package today it was quite a surprise.

Yes, I placed 2 orders. As for the miner I recently received, it is performing well. The miner has averaged 800GH/s which is what 4 boards, or 32 A1 chips should be hashing, according to the A1 chip specifications. Each Kit miner had 5 boards, 40 A1 chips, so that would yield 1TH/s. I have not tried changing the frequency of the chip. Right now each board is running at 800Mhz, which can be changed up to 1050Mhz. (The increments are 50Mhz up to 1050Mhz). I think the 4 boards could then yield 1TH/s, but that could shorten the life of the chips or cause them to burn out. I don't want to risk it.

On another note, I found how to change the language to English. If you SSH into the miner and open the file /var/www/conf.php there is a LANG variable that is set to "zh". Change that to "en" and save the file. The site will be in English without the help of Google Translate.

I also noticed that the 2nd and 3rd Pool entries are being essentially ignored. I see the entries present when looking at # ps -efww | grep cgminer. I tried with different pools and different workers on each Pool but the 2nd and 3rd entries report that no work is being done. Finally I set all three entries the same and called it a day.

I setup the miner to mine on Eligius today, 7/23 at 12pm EST. You can see the results here: http://eligius.st/~wizkid057/newstats/userstats.php/1Pof4JuXwDzvL6BK6r7roKuCmDMUUkghgn

On the cgminer front (since you seem comfortable with the CLI) you could write a small script for that. Later on I can post one I use that will allow you to post multiple pools (easy to do). I honestly do not like the web interfaces in general. But if the web interfaces accurately queries cgminer then running it from a console and scripting it to start like that will work better. Might not show the pools but the hashing speeds should show up.