Do you have a specific suggestion for brand / type of PSU to replace what is in it currently? -- I've looked around and I can't find a PSU with two 12 pin connectors. -- the standard is 10. Please specify. THank you!!

Quote from: krfighter on July 31, 2014, 09:13:52 AM

if the miner starts up and shuts down, it is almost certainly bad PSU. You do not need to wait for it to cool down for more than 5 min. Just take out the power cord, take out and reinsert the jumper, and you can start the system again.
The easiest check is to remove one or two blades, and if it works at 80-90%, then grab a more powerful PSU and you will be fine. They did a very bad job putting in 1000W PSU when the system requires over 900W.