Quote from: jtoomim on August 01, 2014, 10:13:29 PM

I received my first SP30. It's got the Emerson PSUs. I'm running it on 122V in our office space because our DC isn't ready yet. It's running at 3383 GH/s right now, and using 1954 W, or 0.577 J/GH. I haven't gotten around to tweaking it yet, or configuring it to ignore the firmware limit on power consumption for 120V supplies. I saw 3800 GH/s at one point, but I think I changed around the settings afterwards and I can't remember what I had it at that gave 3800. I'll figure that out later.

I have it connected to two separate 20A circuits, and I haven't had any breakers trip. It seems it restarts cgminer frequently, which makes it hard to configure. When the fans shut down, you don't know if it's because of something you did or just because it's doing its thing.

ASIC #24 seems to be damaged somehow. It's usually clocked at a lower frequency, and at one time I saw it disabled by the system.

I'll give reports later on how supply voltage and other settings changes performance. I'm going to try the "touch /etc/mg_ignore_110_fcc" mod to see if I can get some moar powr our of the machine.

Edit: Something I did boosted hashrate up to around 3.9 TH/s (and maybe still climbing?). It seems that you may need to click on the "Restart Minergate" button on the main page in order to get new clockspeed settings to be enabled. Clicking the text on the Settings page to restart Minergate might not work. Not sure yet what's going on. More later.

Edit 2: 4158 GH/s now on 122 V using 2688 W at the wall for 0.646 J/GH.

Edit 3: I think the issue I've been observing is that the file /etc/mg_custom_mode exists and had the following contents:

FAN:90 VST:660 VSB:660 VMAX:770 AC_TOP:1150 AC_BOT:1150 DC_AMP:150

The WebUI wasn't updating that file when I entered new settings, so I'm going to change it now by SSH and see what happens. I'm changing them to this:

FAN:90 VST:670 VSB:670 VMAX:780 AC_TOP:1250 AC_BOT:1250 DC_AMP:150

Edit 4: Okay, so I changed it, then hit Restart Minergate, then checked the file again, and it's back to VST: 660 etc. Something in the firmware is rewriting the custom mode values with conservative values when Minergate is restarted, it seems. Running the SP30 in Turbo mode (instead of the advanced settings custom mode) seems to produce 4.1 TH/s, but the custom mode is stuck at very conservative settings which give me around 3.4 TH/s.

Old stats, when I was getting 3.4 TH/s. Note the "PSU-TOP[EMERSON1200]: 944->812w" line, which indicates that the top PSU was only using 944 W.

Code:

----------
leading zeroes=42
-----TOP-BOARD-----
PSU-TOP[EMERSON1200]: 944->812w[812 812 812] (lim=1150) 0c cooling:0
LOOP[0] ON :)
0: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 47W 71A 42c] ASIC:[ 80c 565hz(TL:1245/BL: 565) 42 (193)]
1: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 44W 67A 42c] ASIC:[ 80c 545hz(TL:1245/BL: 545) 48 (193)]
2: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 49W 75A 40c] ASIC:[ 80c 585hz(TL:1245/BL: 585) 45 (193)]
LOOP[1] ON :)
3: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 48W 73A 44c] ASIC:[ 80c 555hz(TL:1245/BL: 555) 51 (193)]
4: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 43W 66A 46c] ASIC:[ 80c 545hz(TL:1245/BL: 545) 45 (193)]
5: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 48W 73A 48c] ASIC:[ 80c 590hz(TL:1245/BL: 590) 45 (193)]
LOOP[2] ON :)
6: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 45W 69A 50c] ASIC:[ 80c 575hz(TL:1245/BL: 575) 41 (193)]
7: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 47W 72A 50c] ASIC:[ 80c 575hz(TL:1245/BL: 575) 41 (193)]
8: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 44W 67A 42c] ASIC:[ 80c 530hz(TL:1245/BL: 530) 37 (180)]
LOOP[3] ON :)
9: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 50W 76A 52c] ASIC:[ 80c 575hz(TL:1245/BL: 575) 43 (193)]
10: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 51W 78A 54c] ASIC:[ 80c 605hz(TL:1245/BL: 605) 53 (193)]
11: DC2DC/1/:[vlt1:652 vlt2:658(DCl:794 Tl:794 Ul:778) 48W 73A 54c] ASIC:[ 80c 595hz(TL:1245/BL: 595) 39 (193)]
LOOP[4] ON :)
12: DC2DC/1/:[vlt1:652 vlt2:658(DCl:794 Tl:794 Ul:778) 46W 71A 56c] ASIC:[ 80c 575hz(TL:1245/BL: 575) 33 (193)]
13: DC2DC/1/:[vlt1:652 vlt2:658(DCl:794 Tl:794 Ul:778) 49W 75A 56c] ASIC:[ 80c 605hz(TL:1245/BL: 605) 49 (193)]
14: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 50W 77A 47c] ASIC:[ 80c 585hz(TL:1245/BL: 585) 43 (193)]
----BOTTOM BOARD------
PSU-BOT[EMERSON1200]: 1008->868w[864 868 856] (lim=1150) 0c cooling:0
LOOP[5] ON :)
15: DC2DC/1/:[vlt1:652 vlt2:658(DCl:794 Tl:794 Ul:778) 44W 67A 41c] ASIC:[ 80c 565hz(TL:1245/BL: 565) 53 (193)]
16: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 43W 66A 41c] ASIC:[ 80c 560hz(TL:1245/BL: 560) 48 (193)]
17: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 50W 76A 40c] ASIC:[ 80c 605hz(TL:1245/BL: 605) 36 (193)]
LOOP[6] ON :)
18: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 49W 74A 48c] ASIC:[ 80c 610hz(TL:1245/BL: 610) 52 (193)]
19: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 47W 72A 48c] ASIC:[ 80c 595hz(TL:1245/BL: 595) 53 (193)]
20: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 43W 66A 48c] ASIC:[ 80c 550hz(TL:1245/BL: 550) 42 (193)]
LOOP[7] ON :)
21: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 44W 67A 52c] ASIC:[ 80c 570hz(TL:1245/BL: 570) 50 (193)]
22: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 50W 76A 54c] ASIC:[ 80c 630hz(TL:1245/BL: 630) 56 (193)]
23: DC2DC/1/:[vlt1:652 vlt2:658(DCl:794 Tl:794 Ul:778) 49W 75A 45c] ASIC:[ 80c 620hz(TL:1245/BL: 620) 33 (192)]
LOOP[8] ON :)
24: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 39W 59A 48c] ASIC:[ 80c 495hz(TL:1245/BL: 495) 33 (191)]
25: DC2DC/1/:[vlt1:654 vlt2:658(DCl:794 Tl:794 Ul:778) 49W 75A 55c] ASIC:[ 80c 615hz(TL:1245/BL: 615) 34 (193)]
26: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 49W 75A 57c] ASIC:[ 80c 620hz(TL:1245/BL: 620) 43 (193)]
LOOP[9] ON :)
27: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 49W 75A 60c] ASIC:[ 80c 620hz(TL:1245/BL: 620) 53 (193)]
28: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 48W 74A 61c] ASIC:[ 80c 625hz(TL:1245/BL: 625) 40 (193)]
29: DC2DC/1/:[vlt1:656 vlt2:658(DCl:794 Tl:794 Ul:778) 50W 77A 51c] ASIC:[ 80c 645hz(TL:1245/BL: 645) 48 (193)]

[H:HW:3383Gh[1660+1722],W:1426,L:0,A:30,MMtmp:0 TMP:(26)=>=>=>(52,53)]
Pushed 30 jobs , in HW queue 4 jobs (sw:3, hw:3)!
min:26 wins:1329[this/last min:17/40] bist-fail:81, hw-err:0
leading-zeroes:42 idle promils[s/m]:0/0, rate:2796gh/s
Fan:90, conseq:200
I2C BUSY with BUG: 0
Adapter queues: rsp=3, req=20

New stats, with 4153 GH/s. Note that it's being limited to about 1150 or 1144 W per PSU right now. Need to figure out how to bypass that soon

Code:

----------
leading zeroes=43
-----TOP-BOARD-----
PSU-TOP[EMERSON1200]: 1328->1152w[1140 1152 1152] (lim=1150) 0c cooling:0
LOOP[0] ON :)
0: DC2DC/1/:[vlt1:679 vlt2:682(DCl:794 Tl:794 Ul:727) 63W 93A 53c] ASIC:[ 80c 720hz(TL:1245/BL: 720) 26 (193)]
1: DC2DC/1/:[vlt1:675 vlt2:682(DCl:794 Tl:794 Ul:727) 60W 88A 52c] ASIC:[ 80c 700hz(TL:1245/BL: 700) 26 (193)]
2: DC2DC/1/:[vlt1:681 vlt2:682(DCl:794 Tl:794 Ul:727) 65W 95A 49c] ASIC:[ 80c 725hz(TL:1245/BL: 725) 26 (193)]
LOOP[1] ON :)
3: DC2DC/1/:[vlt1:675 vlt2:682(DCl:794 Tl:794 Ul:727) 63W 93A 53c] ASIC:[ 80c 710hz(TL:1245/BL: 710) 28 (193)]
4: DC2DC/1/:[vlt1:677 vlt2:682(DCl:794 Tl:794 Ul:727) 58W 85A 58c] ASIC:[ 80c 685hz(TL:1245/BL: 685) 32 (193)]
5: DC2DC/1/:[vlt1:677 vlt2:682(DCl:794 Tl:794 Ul:727) 64W 94A 61c] ASIC:[ 80c 730hz(TL:1245/BL: 730) 43 (193)]
LOOP[2] ON :)
6: DC2DC/1/:[vlt1:679 vlt2:682(DCl:794 Tl:794 Ul:727) 61W 90A 63c] ASIC:[ 80c 720hz(TL:1245/BL: 720) 25 (193)]
7: DC2DC/1/:[vlt1:677 vlt2:682(DCl:794 Tl:794 Ul:727) 61W 90A 63c] ASIC:[ 80c 710hz(TL:1245/BL: 710) 32 (193)]
8: DC2DC/1/:[vlt1:677 vlt2:682(DCl:794 Tl:794 Ul:727) 60W 88A 51c] ASIC:[ 80c 680hz(TL:1245/BL: 680) 26 (180)]
LOOP[3] ON :)
9: DC2DC/1/:[vlt1:677 vlt2:682(DCl:794 Tl:794 Ul:727) 66W 97A 63c] ASIC:[ 80c 720hz(TL:1245/BL: 720) 32 (193)]
10: DC2DC/1/:[vlt1:671 vlt2:680(DCl:794 Tl:794 Ul:727) 66W 97A 69c] ASIC:[ 80c 740hz(TL:1245/BL: 740) 33 (193)]
11: DC2DC/1/:[vlt1:675 vlt2:680(DCl:794 Tl:794 Ul:727) 62W 92A 68c] ASIC:[ 80c 735hz(TL:1245/BL: 735) 38 (193)]
LOOP[4] ON :)
12: DC2DC/1/:[vlt1:677 vlt2:682(DCl:794 Tl:794 Ul:727) 62W 91A 73c] ASIC:[ 95c 725hz(TL:1245/BL: 725) 33 (193)]
13: DC2DC/1/:[vlt1:677 vlt2:682(DCl:794 Tl:794 Ul:727) 66W 97A 73c] ASIC:[ 95c 765hz(TL:1245/BL: 765) 41 (193)]
14: DC2DC/1/:[vlt1:677 vlt2:682(DCl:794 Tl:794 Ul:727) 68W 100A 58c] ASIC:[ 80c 740hz(TL:1245/BL: 740) 36 (193)]
----BOTTOM BOARD------
PSU-BOT[EMERSON1200]: 1344->1144w[1144 1144 1140] (lim=1144) 0c cooling:0
LOOP[5] ON :)
15: DC2DC/1/:[vlt1:669 vlt2:674(DCl:794 Tl:794 Ul:727) 53W 80A 49c] ASIC:[ 80c 660hz(TL:1245/BL: 660) 36 (193)]
16: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:727) 55W 81A 48c] ASIC:[ 80c 680hz(TL:1245/BL: 680) 32 (193)]
17: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:727) 63W 94A 49c] ASIC:[ 80c 730hz(TL:1245/BL: 730) 34 (193)]
LOOP[6] ON :)
18: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:727) 62W 92A 57c] ASIC:[ 80c 735hz(TL:1245/BL: 735) 42 (193)]
19: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:727) 61W 91A 58c] ASIC:[ 80c 730hz(TL:1245/BL: 730) 32 (193)]
20: DC2DC/1/:[vlt1:675 vlt2:677(DCl:794 Tl:794 Ul:727) 55W 82A 57c] ASIC:[ 80c 670hz(TL:1245/BL: 670) 35 (193)]
LOOP[7] ON :)
21: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:727) 55W 82A 63c] ASIC:[ 80c 685hz(TL:1245/BL: 685) 32 (193)]
22: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:727) 62W 91A 68c] ASIC:[ 80c 740hz(TL:1245/BL: 740) 24 (193)]
23: DC2DC/1/:[vlt1:671 vlt2:677(DCl:794 Tl:794 Ul:727) 63W 93A 56c] ASIC:[ 80c 745hz(TL:1245/BL: 745) 26 (192)]
LOOP[8] ON :)
24: DC2DC/1/:[vlt1:673 vlt2:677(DCl:794 Tl:794 Ul:727) 50W 73A 56c] ASIC:[ 80c 595hz(TL:1245/BL: 595) 29 (191)]
25: DC2DC/1/:[vlt1:671 vlt2:674(DCl:794 Tl:794 Ul:727) 62W 92A 67c] ASIC:[ 80c 735hz(TL:1245/BL: 735) 40 (193)]
26: DC2DC/1/:[vlt1:669 vlt2:674(DCl:794 Tl:794 Ul:727) 62W 92A 70c] ASIC:[ 80c 745hz(TL:1245/BL: 745) 34 (193)]
LOOP[9] ON :)
27: DC2DC/1/:[vlt1:669 vlt2:674(DCl:794 Tl:794 Ul:727) 63W 94A 75c] ASIC:[ 80c 770hz(TL:1245/BL: 770) 29 (193)]
28: DC2DC/1/:[vlt1:673 vlt2:674(DCl:794 Tl:794 Ul:727) 60W 90A 73c] ASIC:[ 80c 735hz(TL:1245/BL: 735) 35 (193)]
29: DC2DC/1/:[vlt1:671 vlt2:674(DCl:794 Tl:794 Ul:727) 63W 94A 63c] ASIC:[ 80c 760hz(TL:1245/BL: 760) 48 (193)]

[H:HW:4153Gh[2085+2067],W:1847,L:0,A:30,MMtmp:0 TMP:(27)=>=>=>(65,65)]
Pushed 30 jobs , in HW queue 4 jobs (sw:3, hw:3)!
min:0 wins:985[this/last min:39/55] bist-fail:547, hw-err:0
leading-zeroes:43 idle promils[s/m]:0/0, rate:7689gh/s
Fan:90, conseq:200
I2C BUSY with BUG: 0
Adapter queues: rsp=1, req=21

4.153GH / 441GH = ~ 9 x S3 * ~$400 each = #3600 as we speak...

And you paid what...$5,600...to $11,500 for this "deliver on time and on specs" thingy... Huh