Quote from: booradlly on August 05, 2014, 06:29:49 AM

Quote from: dropt on August 05, 2014, 05:25:23 AM

Five 30A x 208/240V drops terminating with Nema L6-30r receptacles. Get Some PDUs to plug into those. Save
the last 10A of headroom for some huge ass fans. You'll need them.

Quote from: DeathAndTaxes on August 05, 2014, 05:21:06 AM

Why would you want to use 120V? PC power supplies can run on either. 240V is more efficient, cheaper, and puts less stress/heat on the power supplies.

This is exactly what I was looking for, I think. When you say the pc power supply can be run on 240V, are you talking about using the PDUs that others have suggested or something else? I can't plug them directly in as the plug doesnt fit in the Nema L6-30r.

You use something like this to power your PSU's:

http://www.buypdu.com/power-cords/iec-c13/iec-c14.html?gclid=CPLX_vTu-78CFWwQ7AodfRcA9w

Depending on the PSUs you are running will determine if you get the 10 or 15 amp version (though in truth, at 208/240v you will only need the 10amp). The Triplite PDUs are set up to use these cords and will work with any EVGA/OCZ power supply. A typical PDU can be found here:

http://www.tripplite.com/metered-pdu-30a-208v-240v-2u-c13-c19-outlets-l6-30p-single-phase~PDUMH30HV/

Remember, it's more efficient to use 208/240 versus 120 to power your equipment.