Quote from: philipma1957 on August 08, 2014, 01:39:07 AM

Quote from: snowboardbuddha on August 08, 2014, 01:16:24 AM

Quote from: allcoinminer on August 07, 2014, 11:50:29 AM

Quote from: snowboardbuddha on August 07, 2014, 11:36:24 AM

Anyone else having issues with discarded shares? I hooked up my 2 new S3s yesterday and have 60k discarded vs 11k accepted as of this morning,

Also, One of the S3s does not show the fan speed but I can see it running. Is there an update for this?

3rd issue: One miner only mines at 415 GH/s. much lower than the advertised 440. Again, is there an update? The other one mines constant at 450 GH/s.

Thanks in advance.

Are these in stock clocks or you overclocked them? Which batch is this from?
Which Power Supply you are using and how many Antminer S3-s are connected in it?
Also post your Miner Status page here from both the S3s.
Also show your pool data by hiding the username and password.

They are stock clock from batch 5 running on 2 S3s on one Corsair RM 1000. The hash rate has come up but it's not too stable.
Any idea about discarded shares?
you can see in the second picture what I was saying about fan speed missing.
http://i.imgur.com/IoWXnAn.png
http://i.imgur.com/hcw6Oro.png

the temps are decent so other then the fan speed meter
your miners are great discarded shares are a meaningless stat.

the math for miner 1 hw/diffa + diffr + hw = 83/4965376+11776+83 or 83/4977235 = .000016675 x 100 = .00166 percent error rate.

accepted shares are 19396 on miner one

accepted shares are 19617 on miner two close to the same for the same time and the av gh = 440 and 438 which bears out to your accepted share number

the 5 second speeds are bs they move all over don't worry about them.

for shits and giggles do the error rate for miner 2

it will be about .0333 percent that is 99.67 good. and 98.00 is pretty much passing.

That HW seems high! I have 1600 HW after 13 days of mining non stop. 452,000 shares accepted and 1600 HW. This is also with 250 frequency.