Quote from: AMT_miners on August 13, 2014, 08:56:10 PM

Quote from: sabre on August 13, 2014, 08:48:13 PM

Quote from: AMT_miners on August 13, 2014, 08:34:03 PM

Quote from: sabre on August 13, 2014, 08:30:54 PM

Quote from: AMT_miners on August 13, 2014, 08:26:12 PM

Quote from: sabre on August 13, 2014, 08:24:24 PM

Quote from: AMT_miners on August 13, 2014, 08:22:52 PM

Quote from: sabre on August 13, 2014, 08:19:11 PM

AMT,
I've managed to connect to the web interface and input my credentials for BTC Guild. The interface says "running" but nothing is showing up on BTC Guild's dashboard. After a couple of minutes your interface says "stopped".

Can you assist? I've left a VM on your support line as well.

Thanks

What's the url your using to connect to btcguild?

I've tried both the following:

stratum+tcp://stratum.btcguild.com:3333
stratum.btcguild.com:3333

Account name is my worker name that I have been using..

How about the difficulty setting on the miner? 1024?

I had left the difficulty to the default which was 256. Just changed it to 1024 - still same issue.

Thanks in Advance.

Ok change it back to 256. And make sure the worker on btc guild is 256 as well. Does BTCguild detect the worker and is just showing a zero hash rate? Or the worker doesn't even show up?

Showing offline in BTC Guild. Its showing zero hash rate and offline. Reset BTC guild and AMT to 256 and tested. Still same issue.

Turned off and turned the unit back on. Still no hashing and the air is still cool.

first try a different pool.
second check your router to make sure its not blocking the miner in some way. It seems like the issue is network related, check your router's settings. Some have automatic firewalls for unrecognized machines.
third open the miner and make sure all the plugs are connected tightly and the lights from the modules are working as well.

Ok, so I had plugged in the main motherboard but did not put in the power to the cards. Plugged them in.
The top card - no lights are coming on.
Other cards below - lights are flashing

However, now the web interface is dead. I cant connect to the web interface via IE or Chrome.

I also pulled the power cable out of the top card just to see if the web interface comes up and still no interface.

So one card is not initializing (unless the blinking lights mean the same). and cannot access web interface now.

Let me know how to proceed.

Thanks in Advance