Quote from: friedcat on August 27, 2014, 04:23:51 AM

How to run on pools other than ghash.io and btcguild with Raspberry PI and bfgminer

   1.Modify /etc/apt/sources.list on your Raspberry PI

   deb http://mirrors.ustc.edu.cn/raspbian/raspbian/ wheezy main non-free contrib
   deb-src http://mirrors.ustc.edu.cn/raspbian/raspbian/ wheezy main non-free contrib

   2.Update the aptitude package on your Raspberry PI

   sudo apt-get update

   3.Download bfgminer

   wget http://luke.dashjr.org/programs/bitcoin/files/bfgminer/4.7.0/bfgminer-4.7.0.zip

   4.Uncompress

   unzip bfgminer-4.7.0.zip

   5.Install dependencies

   sudo apt-get install autoconf libtool libncurses-dev yasm curl libcurl4-openssl-dev libjansson-dev pkg-config libudev-dev uthash-dev libusb-dev libevent-dev

   6.Enter bfgminer directory

   cd bfgminer-4.7.0

   7.Run configuration

   ./configure

   8.Compile bfgminer

   make

   9.Run bfgminer

   ./bfgminer -o stratum+tcp://stratum.f2pool.com:3333 -u -p 123 --stratum-port --set-device PXY:diff=

   10.Set static IP for Raspberry PI(modifying /etc/network/interfaces)
   Take the IP address 192.168.0.100 as an example. Replace iface eth0 inet dhcp as:

   iface eth0 inet static
   address 192.168.0.100
   netmask 255.255.255.0
   gateway 192.168.0.1

   netmask and gateway are decided by your Raspberry PI's local network settings.

   11.Configure ethernet controllers

   Same example as above. Modify the pool address on ethernet controller to 192.168.0.100 with port 3333.

Actually, I recommend you using Arch Linux for RPi.

It would be much easier to configure:

1. pacman -Syu
2. pacman -S bfgminer
3. and then, you can run bfgminer with your specified parameters.