Quote from: nwoolls on August 31, 2014, 04:10:08 PM

With BFGMiner and set-device, you can specify either the device path or device serial number, e.g.

Code:

--set-device antminer@/dev/USB1:clock=ABC
--set-device antminer@S1234567:clock=XYZ

The issue with using the device path is it may change after a reboot. The problem with using the serial number is many hardware manufacturers still do not brand their devices.

However, you can use the following tool to fairly easily add serial numbers and branding to cp210x devices:

http://cp210x-program.sourceforge.net

Thanks update my .config file code above with antminer@COMXX:clock=x0123 seems to work for Windows. Same thing on reset the COM port might change since I inserted miners in different hubs at different times to get the order.