Quote from: soy on September 16, 2014, 10:36:51 PM

Quote from: Stratobitz on September 16, 2014, 09:44:27 PM

Quote from: IITravel01 on September 16, 2014, 08:26:33 PM

Quote from: R4v37 on September 16, 2014, 06:13:51 PM

Quote from: Master One on September 16, 2014, 05:57:54 PM

Quote from: ZiG on September 16, 2014, 05:48:19 PM

Quote

I wouldn't be so sure. I think they can squeeze 2 TH/s out of 1100-1200W.

2000G * 0.7W/GH = 1400W MINIMUM...OK... Huh

The assumption is that the S4 works with underclocked/undervolted ASICS to reach a better W/GH ratio, I would assume somewhere between 0.55 and 0.65 W/GH, so one 1300/1400W power supply could indeed do. But of course we'll not know for sure till @BITMAIN reveals the exact specs.

still, they wont give you something like
Evga 1500w Platinum Cheesy

and, btw...
5units of S3+ = 355w x 5 = 1,775W

i assume S4 will be around 1500w - 1700w
they wont waste chips like that..
they better selling chips like avalon do than planting so much undervolted chips
and sell it so damn cheap Grin

they're not doing charity here buddy Cheesy

In the U.S. a standard electrical socket is rated at 1600w max. I believe, so I don't think they'll go over that. Would be nice if a 1300w single power supply would be able to handle the new S4 with the EVGA G2 so cheap right now.

A 20 Amp 110 v circuit can handle a continuos load of roughly 2000 watts, not 1600. Give or take a bit of course. Most new construction uses 20 amp breakers.

Strato

It's not to say that a general contractor building kitchens won't put a couple of 15 amp outlets on a #12 gauge Romex circuit to a 20 amp breaker.

ha ha

..it is exactly what they did in my house-dinner room 20A circuit (I checked), all outlets there are of regular size (no T), the same in the garage (the only difference is that it says GFCI on outlets).