Quote from: grn on September 20, 2014, 04:30:43 AM

Quote from: 00pmac00 on September 20, 2014, 01:15:42 AM

Can someone recommend a temporary fan replacement, I received an S3+ today but one of the fans is DOA, it worked a bit but died shortly afterwards. I currently have it swapped out for a PWM 120mm from a spare liquid cooling unit I have lying around, but it isn't as fast and not nearly as much airflow as the ones it comes with. Easy to tell, as RPM on replacement is max around 1200-1300, and the temperatures are a few degrees up over norm at stock speed vs my units on overclock that are running cooler.
I have contacted Bitmain, I'm sure they will reply Monday. But in the meantime I need to keep the unit running but I don't want to overclock it with this current temp replacement.

http://www.ncix.com/detail/scythe-ultra-kaze-120mm-high-38-26744-1343.htm

Replaced the temporary fan with the one you suggested. I didn't realise they were not PWM, so that bugged me a bit, at first. But only because I didn't look, which was probably a good thing, because I might not have ordered it if I didn't see that as part of the fan. So I am glad I missed it.
I ordered 2, but only installed one on the exhaust side where the defective fan was from Bitmain. It spins at 3000RPM +- a few percent, and the units over clocked at 243.5 and its running at 37/38 degrees Celsius. 2-4 degrees cooler than all my other units clocked at 237.5. So I can accept the fact the fan runs full speed, as long as it lasts for a long time. I may add one to each my units to keep them cooler. Thanks for the recommendation.

http://i1159.photobucket.com/albums/p635/Paul_MacDonald/screenshotofnewfantempsandspeed-1.jpg