Quote from: georgeblair on September 21, 2014, 10:57:27 PM

Quote from: KimmyF on September 20, 2014, 06:51:01 PM

Quote from: georgeblair on September 20, 2014, 01:50:22 PM

According to portcheckers.com, port 32348 is open and my Windows Firewall allows the XC app. Not sure if there is anything else I should be checking....

Sad

If you are on Windows can you try the following command in a cmd box?
netstat -an | find "32348"

It will show all in & out connections your wallet has.
example from my own setup: (192.168.0.49 is my local ip)
TCP 192.168.0.49:32348 178.221.54.98:62146 ESTABLISHED
this is a connection to my wallet from the outside

and this are some outgoing connections to other Xnode/Xmixers
  TCP 192.168.0.49:50000 81.82.165.203:32348 ESTABLISHED
  TCP 192.168.0.49:50079 78.108.54.193:32348 ESTABLISHED

if you see no connections and only a line like this:
  TCP 0.0.0.0:32348 0.0.0.0:0 LISTENING

then you still have a firewall or nat problem

Thanks for the additional check I can do! Unfortunately, I am still unable to send a private transaction (and therefore be a XMixer) even though it seems like port 32348 is working:

After running "netstat -an | find "32348" i get one listening incoming connection:

0.0.0.0:32348 0.0.0.0:0 LISTENING

and 7 established outgoing connections:

192.168.1.8:58755 104.131.208.92:32348 ESTABLISHED
192.168.1.8:58757 101.131.207.232:32348 ESTABLISHED
etc,
etc.

and a

[::]:32348 [::]:0 LISTENING

Anyone have any suggestions on what I'm missing/doing wrong? Thanks!

ps. I'm connecting my laptop to a wireless hub that then goes to my ISP router. My internet connection only shows 1 router in my path to the internet though....

Think your router config is not ok, there should be at least one connection like:
192.168.1.8:32348 :<50K port>

edit:
#1: did you tell your router to forward connections on the public port to your local ip-address?
#2: a laptop over wifi can can get a new ip-adress on reboot after some time, maybe disable dhcp and go for a fixed local address