Quote from: djob001 on September 23, 2014, 10:23:33 AM

i have just got my kits and i am having problems with the upgrade,the machine turns on with the blinking lights looks like its hashing only to have 0 gh in miner status its connected to my pool because it says alive also in miner status all parts are correct thermal paste as well i used an anti static wrist band when building it looks like the one in the picture after i was finished on the bitmain site only it has green boards i have tried all firmwares S1 AND S3 oldest first and still the same looks like its hashing but not

any help please thanks

I installed this upgrade yesterday. Used the latest firmware (antMiner_S320140826.bin, do not tick 'save settings'). After re-flashing the firmware it returns to 'default' settings (IP 192.168.1.99 and the test pools). You cannot leave both miners at this IP, so you'll need to re-configure the network WAN addresses and your pool configuration. You also need to select the frequency settings at Miner Configuration/Advanced settings, 'save & apply'. In the odd case of a 'stubborn' miner, you might need to perform a system reboot (System tab, reboot, click on 'perform reboot'). My upgrade went smoothly and both S1's are now functioning as S3+.

Cheers