Quote from: Zich on September 23, 2014, 11:10:15 AM

Quote from: macher on September 23, 2014, 10:44:29 AM

...................

no, the PSU is not the problem because it is connect to two 12v rails (2x30A)

Quote from: Mariowot on September 23, 2014, 06:35:36 AM

You might aswell have wrong atached coolers to the board, i did have the same problem at the begining

no, that is also not a problem - if you connect it wrong, the fan is not moving

I tried to disable the chips one by one and only just one configuration is working - the 12 (0+1 disable). All other possibilities = ZOMBIE

I think that the board is bad... but maybe is between chair and keyboard ;-) I have other 3 boards that is not connect so tomorrow I will try it.

Woo, i am not really sure that connect 2 different rail to one system is good idea. I am definitely not going to do that.
Could you try again using 1 rail only?

If you are going to try another untouch board, please use 1 rail only

If you look at the PCB of Enermax, it is not problem, but who knows

The rest of boards I will test with Fortron AURUM PRO 1200W 80PLUS GOLD (one single 100A 12V rail). Just for sure.