Quote from: kingcolex on September 30, 2014, 03:14:51 AM

Quote from: IITravel01 on September 28, 2014, 09:46:19 PM

Installed the pair of AntMiner S3+s in a case at my office today. Oddly, when I built it at home and turned it on, the power supply showed it was running idle at 78-79watts (network switch not connected), but at the office here after I powered it in (with network switch connected) is showing about 725watts which I thought it wouldn't do until I set it to mine. Anyway, I hoped it wouldn't blow any fuses having a couple computers, printer, etc. plugged into the same socket and luckily it didn't. So all is good so far. Power supply shows it's running at 91% efficiency and in case temp is at 103F.
http://i172.photobucket.com/albums/w35/IITravel/IMG_1397.jpg
Now being a newbie, I've got to set up the rest. Downloaded CGMiner 4.6.1 so tomorrow I'll start setting up the rest, but being absolutely new I hope it doesn't take long to get it up and running.

Nice case, i keep seeing these s3 in cases, what is that monitoring screen.

Nice setup really, are the antminers in good temperature range ?