Liquid Cooled Miner C1: It is not only cool, but it is cool

Only Available at bitmaintech.com

The density of miners is becoming more and more important as the rapid growth of the bitcoin hash rate continues. The industry is trending towards industrial level mining, which leaves home miners without much choice for compact and quiet miners. In response to this problem, Bitmain has developed a solution. The high end PC industry has used water cooling for years, and this expertise has been transferred to mining equipment. Bitmain is proud to announce our first Liquid Cooled Miner the C1. The 1st Batch of C1s are priced at 1 BTC per unit (excluding shipping), with dispatch estimated Oct. 25th Specifications: * Hash Rate: 1,008 GH/s guaranteed * Power Efficiency: 0.8 Watt/GH/s at the wall * Voltage: DC 12V input, 70A recommended, no PSU * Water cooling blocks interface: G1/4-8 thread screw * One 14038 Fan working with water cooling block * Temperature: 38~40 °C at 25 °C ambient temperature * Noise: 40~45 DB at 25 °C ambient temperature * Ethernet connection, Stand alone * Certificate Compliance: FCC/CE Recommend Accessories: Note: Bellow recommend parts are not included in C1, but a purchase links recommended on bitmaintech.com. * Water cooling pump: Flow 450L/H, Head Pressure 3.0m, DC12V/0.5A, G1/4-8 screw threads, 1 unit * Radiator: Aluminum, 389mm * 128mm * 36mm, G1/4-8 screw threads, 1 unit * Fan 12025: DC12V/1A, including grills, 3 units * Transparent tubing (ID/OD): 5/16 / 3/8 (10/8mm), 3 meters * Coolant: If you choose an aluminum radiator, you can use deionized water with an additive, or specialist coolant. If you buy a copper radiator, you must only use specialist coolant. * Connectors: G1/4 thread 10/8mm fittings to connect the C1 to the pump and radiator. Either compression fittings or barbs 4 units * Spring clamps or worm drive fittings if you chose barbs, 6 units Note: 1) Power consumption: Quoted figures depend on your PSUs efficiency, the ambient temperature and the accuracy of the power meter. 2) PSU: You must provide your own ATX PSU. There are 4 PCI-e connectors for +12V DC input and all are required. Features: Stone alone: C1 mines are stand alone and do not require a proxy server or external controller. Setup consists of installing the water pump, radiator, filling the coolant, connecting a PSU and an Ethernet cable. Cool: Skving technology is used to design New-Style water cooling block. This allows for a large heat-transfer area, which keeps the PCBs exceptionally cool. Thermal Images comparing liquid cooling and air cooling at 1TH/s hashing power Quiet: Four hashing PCBs with 16 BM1382 chips per board are mounted to the both sides of two aluminum water cooling blocks, which are 250mm-long, 115mm-high and 13mm-thick. Each water cooling block contains 24 water channels for efficient heat transfer. A quiet fan works in tandem with the water cooling blocks in order to keep other board components on the C1 cool. Stable and Accurate: Customized and optimized from the design of the S3+, the C1 is designed with the same PCBs and is supported by Serious-Double-Block Liquid Cooling technology. This allows C1s to benefit from the stability and accuracy of S3+ required to run 24 hours a day with minimal downtime. Exquisite: Die Casting Forming technology integrates the common heatsink with a water cooling block, compacts two water cooling blocks working in tandem. These technologies are saving space and allow for 1TH/s of power in a case the same as the S3. C1 Pictures: