Quote from: ruptan on October 11, 2014, 01:41:49 PM

Quote from: Xuorc on October 10, 2014, 10:48:19 PM

Quote from: ruptan on October 10, 2014, 09:51:03 PM

Quote from: Xuorc on October 08, 2014, 07:48:26 AM

Quote from: thiec on October 08, 2014, 04:37:22 AM

Quote from: Xuorc on October 07, 2014, 08:34:00 PM

OK - solo mining guide as promised.

---------------------------------------------------------------------------
Note:

1. This is the first time I've solo mined but it's working.
2. I think I'm getting a bit more than from a pool but I've had good results from pools as well, which is an easier option.
3. Pools are better when the difficulty is high.
4. I'm not an expert!

---------------------------------------------------------------------------
My rig:

4 x AMD R9 270X which I'm getting just over 2.5 Mh/s from each card, giving me over 10 Mh/s in total, running on Windows 7.

---------------------------------------------------------------------------
Steps:

1. Download the latest mining software - I use sgminer 5: https://www.nicehash.com/software/#sgminer.

2. Download the ExclusiveCoin wallet (see front page - https://bitcointalk.org/index.php?topic=771755.0).

3. Run wallet and allow to sync blockchain.

4. Close wallet.

5. Create a text file with the following contents.

server=1
listen=1
daemon=1
rpcuser=user
rpcpassword=pass
rpcallowip=localhost
rpcport=3333

Set user and pass to something of your choosing.

6. Rename this text file to ExclusiveCoin.conf and put in your ExclusiveCoin data folder where your wallet.dat file is. (I have my data folder in a different place than the default and use the -datadir flag but it should work in the default folder).

7. Create a shortcut to the ExclusiveCoin-qt.exe and add the flag -server so it becomes (Path_To_Wallet_Exe)\ExclusiveCoin-qt.exe -server. (Probably don't need the -server as it's duplicated in the conf file).

8. Create a batch file to run the miner using the same user and password you put in the conf file. This is my batch file:

del *.bin
color 02
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
(Path_To_Miner)\sgminer.exe -o 127.0.0.1:3333 -u user -p pass -k x11mod --intensity 17 --worksize 256 --thread-concurrency 16000 --gpu-threads 2
del *.bin

9. Run the wallet and let it sync.

10. Run the miner. (You won't get much information until you get a block and it takes a little while to get going).

11. Keep wallet open (the miner is talking to it!).

12. You can look in the log file to see that things are actually happening.

Goto Help->DebugWindow->Debug log file->Open.
Scroll to bottom.
When someone else has made a block (which is most of the time) you will see messages such as received block [hash], ProcessBlock: ACCEPTED etc.

---------------------------------------------------------------------------

That's it, let me know if it works, pm me if you need help. If anyone else can point out things I could do better, feel free Grin

Nice tutor and inspire me to try solo mining

Thanks

Have you tried, is it working?

Hey,
I have tried and it is working very well. So far I made 2 blocks in 8 hours. However I do not see them in the exchange and only in my Wallet. Do you know what that could be? I stopped it after finding the blocks as I think it is better to mine in suchpool then solo. Such pool gives you almost 30 excl for 24 hours for 1.5 mhz. Thanks

Great

I'm not sure what you mean by exchange?

It may well be the case that you'll get more on pools. I said that I'd had good mining with pools. I'm not solo mining because its better, just because I can and have enough hash power compared to the network for my average to be reasonable. If there was a lot more network hashing then I could be lucky or unlucky solo mining. Pools provide a great service to a) Make it easier and b) Smooth out your luck.

I've always used pools before and I've never had a bad one.

Happy mining ...

Oops! I meant the blockchain. I do not see my blocks in the chain https://chainz.cryptoid.info/excl/. It is showing wrong EXCL then what I have in the wallet. Thanks

Sent you a pm.