Quote from: RB25 on October 30, 2014, 07:00:30 PM

Quote from: sgi02 on October 30, 2014, 05:30:34 PM

Quote from: RB25 on October 30, 2014, 12:56:20 PM

Quote from: sgi02 on October 30, 2014, 03:41:09 AM

The net hashrate for P$ has been between 80-500 g/hs for a while now. I could, hell; anybody could 51% this coin with a single S3. I've been mining with a couple old U2's for fun, and I have been consistently hitting blocks left and right. The reward has been reduced to 30 P$ per block (0.00001500 total at today's prices). If you completely controlled the network, and mined a ton of P$ the market wouldn't be able to bear massive dumping due to lack of overall volume, and forget the lack of volume, there's a total lack of interest in this coin.

I started mining with Scrypt, and P$ was the reason I started buying ASIC's and mining SHA-256. Its a shame that a coin with such promise has been such a colossal letdown.

Can you post your conf and bat file? I am trying to get mine to work, but it won't go in CGminer.

Petrodollar .conf = ...

server=1
listen=1
daemon=1
addnode=162.243.147.115
addnode=100.74.48.37:2103
rpcuser=pd
rpcpassword=x
rpcallowip=*
rpcport=23931
netport=23931

My .bat file for solomining looks like this...

bfgminer.exe -o localhost:23931 -u pd -p x

Should be the same with cgminer, just make sure your rpcuser/password in the .conf file match the username/password in your batch file. Good luck!

Still not working in solomining. The cgminer starts up, says its looking for work from a pool and then times out. The BFGminer is not recognizing the U2. I have the UART USB and Zadig on my PC as well.

Full .bat file using BFGMiner 3.1.0, with U2 overclocked to 2.10 G/Hs...

bfgminer.exe -o localhost:23931 -u pd -p x -S antminer:all --set-device antminer:clock=x0A01

For setting your clock speed on the U2 use the following chart...

Frequency | Hashrate | Value| Timeout
125.00 MHz | 1000 MHs | 0481 | 042 ms
137.50 MHz | 1100 MHs | 0501 | 039 ms
150.00 MHz | 1200 MHs | 0581 | 035 ms
162.50 MHz | 1300 MHs | 0601 | 033 ms
175.00 MHz | 1400 MHs | 0681 | 030 ms
187.50 MHz | 1500 MHs | 0701 | 028 ms
200.00 MHz | 1600 MHs | 0781 | 026 ms
212.50 MHz | 1700 MHs | 0801 | 025 ms
225.00 MHz | 1800 MHs | 0881 | 023 ms
237.50 MHz | 1900 MHs | 0901 | 022 ms
250.00 MHz | 2000 MHs | 0981 | 021 ms * STOCK
262.50 MHz | 2100 MHs | 0A01 | 020 ms
275.00 MHz | 2200 MHs | 0A81 | 019 ms