Quote from: BrimStone on October 31, 2014, 08:16:07 PM

I was able to fix the issues with my boards. Instead of just thermal paste I used:

Fujipoly / ModRight Ultra Extreme System Builder Thermal Pad Blister Pack - 1/2 Sheet - 200 x 150 x 0.5 - Thermal Conductivity 17.0 W/mK

I cut small squares of the thermal pad, cleaned the paste off the cooler and the chip, and applied the pad material. This made a huge difference in the cooling ability of the fans.

Just an FYI if you are having issues...

-BrimStone

Quote from: BrimStone on October 27, 2014, 04:28:46 PM

Is there a diagnostic procedure for the HEX4M running on the TP-Link devices?

I have several HEX4M boards which are running around 4Gh and I was hoping there was a process for figuring out what is wrong with them.

I remounted the coolers with fresh paste and tried different settings but they still don't behave properly.

what do you mean with huge diffrence?
What changed?