Can someone help me?
I became today my Antminer S3.
i give him power and put lan cable insite.
then power on.
the fan works for 1-2 seconds, lan blinking red and green, then fan going out and the LED on the Lan is Blinking RED
i can not go on 196.168.1.99
i can´t see the miner in my fritzbox.
is not working:( what can i do?
I was having same problem with my miner. Your miner is not fully powered up.
Switch of the power supply & turn on after 5m, make sure your power supply is dedicate to this miner (i.e. one power supply for one miner)
Repeat the above step with a gap of 5m until your miner is fully powered up. If you succeed than set the frequency to s3+ default & reboot. Make sure your miner is powered up for 2 days. This will fix the problem, if not than change the power supply. Please let me know if it worked for you.