Quote from: RHA on November 27, 2014, 11:25:38 PM

Quote from: PatMan on November 27, 2014, 11:39:07 AM

Quote from: zvisha on November 27, 2014, 11:29:10 AM

Quote from: PatMan on November 27, 2014, 11:17:42 AM

I'm very happy with my SP20's performance with p2pool, it's steady and to spec. I do have a couple of questions though, if someone can help me out:

I want to experiment with the -queue setting, as from my experience p2pool likes this set to zero & reduces the DOA/stale rate. I presume that as there is no flag in the cgminer command already - it is using the default setting of 1? When I add the command "queue":"0" to cgminer via ssh & restart the miner, the queue flag is displayed on the cgminer pools page, but with no value stated underneath, instead of showing 0. Is this a bug, or am I unable to use the queue command on the SP20?
You can change params in /etc/cgminer.conf. You can also replace cgminer in /etc/bin/ with custom cgminer, or with script that will call any excecutible with any parameters. I am not experienced with cgminer in p2pool to help beyond that.

Also, on the asics stats page, am I correct in thinking that board 0 corresponds to loop 0, board 1 to loop 1, etc? I've noticed that loop 0 & 2 are running at a lower temp than loops 1 & 3 - so was wondering if I can increase the watts to those loops/boards via the settings page? Or do the watts have to be the same for all 4 boards (power units on the settings page)?
There are 4 virtual boards in SP20, and the back boards (1/3) are throttled more in temp over 17C because they are not getting cool air. Increase fans or decrease ambient temp, if possible.

Thanks in advance

Inline.

Hi zvisha,

Inline? Does that mean the watts must be the same for all 4 power inputs?

Thanks again

PatMan, you problably have figured it out by yourself already, but "Inline" means here "The answers were placed inline as bold text".

Yeah, I worked that bit out eventually... Cheesy

Thanks. But I still don't know if it's OK to set the boards/loops at different settings or weather I have to keep them all the same......