Quote from: scifimike12 on June 16, 2012, 07:24:00 PM

Quote from: pekv2 on June 16, 2012, 04:35:51 PM

Quote from: mrb on June 16, 2012, 09:07:14 AM

pekv2, you don't need 3 resisters per dummy plug. And you don't need the dvi-vga adapter either: http://blog.zorinaq.com/?e=11

That link makes no sense. on the diagram, it showing c1,c2 and c3. then a photo showing a resistor in C2-C5. And i'm not sticking nothing in my dvi ports except the dummy plugs.

I do need dummy plugs with 3 resistors, explanation below V.
https://bitcointalk.org/index.php?topic=87611.msg965184#msg965184

You can insert on end in C1, C2, or C3 and the other in C5.

From the article:

Quote

I simply insert the resistor 75 Ω is the ideal spec in the DVI output port to make contact between C1-C5 (analog red - analog ground), or C2-C5 (green - ground), or C3-C5 (blue - ground).

It's the same thing as using a dummy plug, except that you can remove the dummy plug whenever.

Yea, I'll just stick to my dummy plugs as I bolded the quoted above /\.