Quote from: cablepair on June 19, 2012, 10:04:05 PM

Quote from: filharvey on June 19, 2012, 10:01:03 PM

Quote from: stcupp on June 19, 2012, 08:15:21 PM

Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at stephen@btcfpga.com or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans

I did all that, restarted it, It went through the programming, and then setting the clock speed using the cgminer-2.4.2mmq build, but still not seeing any shares accepted or rejected.

On the cgminer-2.4.3-win32 build, it seems to just crash still.

Phil

send email to stephen@btcfpga.com

he is available now to provide tech support

how about an irc channel.. like #btcfpga on freenode?