Quote from: chinesebob on December 14, 2014, 05:28:38 PM

Quote from: pekatete on December 11, 2014, 09:37:38 PM

If anyone still running the new firmware, would you please post here the line used to start cgminer? It "should" be in the System Log (under Status) immediately after starting up (I think that is where I saw it before, but may be wrong!) or even better, if you SSH into the rig open the file /etc/init.d/cgminer with vi editor and scroll down to the line that starts PARAMS= (not #PARAMS=). I think the issue of dropping hash-rate may be due to the setting of auto-voltage / frequency (and the startup line may reveal that!).

You can extract the filesystem from the new firmware like this

Code:

dd if=antMiner_S320141126.bin of=kernel bs=1 ibs=1 count=1015116
dd if=antMiner_S320141126.bin of=filesystem.squashfs bs=1 ibs=1 count=2448854 skip=1015116
unsquashfs filesystem.squashfs
ls -1 squashfs-root

Do you happen to know the Windows commandline equivalent too? I ask as I do not have a linux installation at hand .... unless of course that'd work in MinGW as well.