Quote from: pekatete on December 20, 2014, 11:02:39 PM

Quote from: nitrox1 on December 20, 2014, 10:36:01 PM

Quote from: pekatete on December 20, 2014, 10:28:25 PM

You are getting somewhere then ....
What IP did you set for your PC (tftp server) and the control board? These are supposed to be the same and as far as I can recall, you can NOT be connected to the wider network (at least from what I recall, but I could be wrong on that).

Them ALLLLLLL!

I get no response from 1.250 which the ping said was alive.

TFTP2.exe responds to 1.100 and 1.1, when I input to the S3 TFTPboot.

But it's looking for an img file

Know how to turn a .bin into a .img?

Edit: .1.100 was it's pre brick IP address

It is not a matter of turning a bin into an img file as the original upload takes the bin file. It may be a matter of simply changing the extension (or indeed telling the tftp server to look for a bin rather than img ... don't ask me how)

Din you try and type in the run mtd .... command?

Yes, I did , won't except commands, run mtd, mtd, or erase rootfs_data