Quote from: vabchgent on December 23, 2014, 08:09:20 PM

Quote from: pekatete on December 23, 2014, 08:01:38 PM

Quote from: vabchgent on December 23, 2014, 07:52:48 PM

Quote from: nitrox1 on December 23, 2014, 07:48:44 PM

Quote from: vabchgent on December 23, 2014, 07:38:59 PM

I just had to edit my post looks like 0720 is right for 225 freq but have to monitor for 24hrs make sure theres no unexplained drops

Seems low to me, but I'm going to try it, myself

Seems low to me too from what I have been reading but right now my GHS is consistent above 432GHS.

I derived the table below from the BM1382 datasheet, the red numbers are the non shipping OC's (and therefore estimates for the settings and speed), however the rest are straight from the datasheet.

So the datasheet recomended voltage setting for freq 225 is 0.72v, i.e 0720

pakatete
Can you do combinations like
07650 = 0.765
07350 = 0.735
Would these examples be a correct way to use voltage. Just making sure

I would like to try to get 231 Freq working any ideas on where to start voltage wise between 0.7xx and 0.7xx

Thanks

I am running the 231 on ALL 106 s3's. some i did 072, some I did 068. it did NOT make a bit of diff. all the ants are running OK. except some are dropping blades.