ok nm i got them to run on Phoenix Miner turns out one card is bad now getting 158 on Phoenix Miner but still geting the pc reboot everytime i try to run claymore 15, on the known good cards, man what can it be and now my other rig which is a 8 x rx570s is not letting me run the 8th card i mean it will load the memory timings and everything but when with the other 7 cards it'll crash but when ran alone with the -di option it will mine. man these rigs are starting to make me pull my hair out.
ANYONE ANY IDEAS PLEASE ANYTHING IS WELCOMED!!!
RECAP:
Issue 1= on 6x rx 470 rig reboots the entire mobo/pc when it starts to load the straps.
Issue 2- on 8x rx 570 rig will run 7 out of 8 cards with claymore, however when mining with 8th card alone through -di 7 option it'll mine just fine.




Please help anyone!!!

So then nothing huh...

yes tried that multiple times with a gang of drivers and even went as far as too reinstall windows on a different ssd and all...
ANYONE HELP!!! Please

The same thing is happening to me.I am at my wits end with this rig PLEASE SOME ONE ANYONE HELP!!! so i have a 6x rx rig with 4 x470 and 2 x570 all 8gb. ok so like a few days ago it crashed right and this is after a month of solid mining with no resets or reboots or crashes. so things that i have tried i replaced the psu with a 1200 watt seasonic prime which is more than enough, i also switched out mobo from a gigabyte h110 dm3 to a asrock  btc pro, i have tried lowering the clocks, i have tried mining on just the rx470s and the 570s all to no avail, the only thing i havent done yet is switch out all the risers i am waiting on mine to arrive which is tomorrow. but i highly doubt that will fix the issue as i am able to mine with phoneix miner but the hashrate is pretty shittty. i mean going from 191 mh/s to 90 something is unacceptable. so please any one some one please help i am open to any suggestions at this point.

hi did u figure this out because im in the same boat as u were please help!!!

Yes hello to all i just got this board and no matter what i do i cant get the 6 rx570s to show up. sometimes it will show 2,or 4 and one time i even got it to show 5. but i cant figure it out i have a 700 watt psu powering the mobo and cpu and a 1200 watt psu powering the risers and cards...  at times it will show different slots red and green  and the next time the slot that was green is now red and the red one is now green
thanks in advance

One of my rx 570 4gb wont get above 15 mhs using this miner PLEASE HELP!!! Okay so a little background i just built a mining rig that i got some parts for Christmas. I put it together and low and behold my mobo wouldnt boot  so after some trouble shooting i finally said the heck with it and switched mobos to the asus crosshair hero vi. that one booted up just fine,but then was having a heck of a time seeing all of my cards in the bios so after rearranging and tinkering with the mobo, i finally was able to see my 4 rx 570's. so then i booted it up, and another hard time finding the drivers that would work so i went ahead and went with the newest one the 18.6.3 or whatever it is. then i couldnt get the drivers patched (running custom bioses) so i finally was able to patch the driver had to download the latest patcher the 1.4.6. so then finally i could start mining right or at least i thought so. but then i fired up phoenix 3.5d which had been working great for me then i got the opencl cards found or whatever it says.  so then i found the latest phoenix the 4.0b so then that dedicated my cards but am getting sub par results  i was getting 30 mhs on 3 o the 4 cards in prior testing and on the 4th card was getting right around 29to say the least  i have been getting around 119- 123 mhs  on the four cards and now am getting barely over 100 like 102-104 please can anyone have any thing to recommend. to get this back up and running the way it was/suppose to be.
THANKS

yes hello to all, I am proud to bring you a brand new pool @ http://rubenasics.online/Croat
Please come and check it out

yes hello to all i am happy to say that my pool is back online @ http://rubenasics.online/

hello to all im happy to announce a brand new XNB pool with no limitation on payment for the time being  the pool is http://rubenasics.online/

hello to all i am super excited to bring a brand new pool to you guys at 68.183.99.184 and there is no limit of payment of 50 every 3 hours or total of 400 for the day, i know it is is not like an official website but it costs money to up keep the server and i need to make a little revenue before i can open a website to go with the pool so please would you consider mining on the pool please n thanks.
THANKS A TON!!!

well maybe someone can send me a link to this.
THANKS
P.S. Again I need the config for a ryzen 1600 for cnv7. the reasin why i ask is because as of right now am only getting like high 200's with this miner and am getting like high 400s with xmr stak.

Will any one be so kind as to share their config file for CNV7 for a ryzen 5 1600 cpu.
THANKS IN ADVANCE

THANKS FOR YOUR REPLY!!! I guess my question is how do I optimize it for the the cpus I recently mentioned the 8700K, RYYZEN5 1600 AND THE 6800K, and the 2 amd rigs one is 6 rx 560 and the other is 5 rx 570
THANKS IN ADVANCE
RUBEN

yes hello to all i would really like to try this miner out but i just cant/dont understand how to Start it up. I know with xmr stak and srb i would just run the application and then i would fill in the blanks. and then i could edit/ tweak from there i have 4 mining rigs 2 nvidia and 2 amd. i am currently running cryptonight on both of my amd and also on my 2 nvidia rigs cpus. any help would be great it is for a 6800k, ryzen5 1600 and an 8700k. my last irg is a lowly g4400. again any help would be greatly appreciated on how to get this miner up and running.
THANKS IN ADVANCE!!!

hello to all i have a quick a question and it is, is there a way to mine with just one gpu when sing this miner. you see i currently have my rig with 2 1080ti's but i would like to game a bit f at all possible so hece my question how to set it to mine with just one of the gpu's here is my config file.
 {
    "quiet" : true,
    "debug" : false,
    "protocol" : false,
    "no-cpu-verify" : true,
    

    "algo" : "x16r",
    "intensity" : "20",


    
    "url" : "stratum+tcp://x16r.usa.nicehash.com:3366",
    "user" : "37Uy5Bau3mSv7gN4dt7YnBDg88tX8GZs1H.RCLR",
    "retry-pause" : "6",
    "pass" : "x"
}
thanks in advance
Ruben

YES HELLO TO ALL OF MY FELLOW CRYPTONIGHT MINER. I would just like to inform you of a brand new pool @ http://142.93.176.17/dero/ with over 30 blocks found head on over for a zero% mining fee while it lasts.
THANKS AGAIN
RUBEN

It is is there any way to get each board to work on different pool, you know there is 3 boards with a total of 32 chips on each board so i was wondering if there is any way to in the sgminer options to get each board (32 chips) to work on a different pool i have tried to set priority to 2-3 different pools but have had no success.
THANKS A MILLION IN ADVANCE FOR ANY HELP!!!
RUBEN