##PROOF OF AUTHENTICATION##
Bitcointalk Username: BOBAN
Telegram Username : @bobann
Campaign : signature

i just got the verification this morning.  I was doing some reading on the forum here and was told to PM my ticket # to a member named Dargo.  apparently he's a part of the Kraken team here on bitcointalk, and he supposedly expedites their support tickets.  well i did that about two days ago and sure enough this morning i login, and see that my account has been verified for tier 3.  give him a try, he might help you out.

Hi.  My tier 3 verification has been taking over 10 days thus far. I only have about 253 cad in the account.   All replies to the support ticket have gone unheeded.  If anyone from kraken support sees this, my ticket number is #875142.  Thanks.

Never mind, I was able to figure out the problem, which was a security setting in my router.  For those of you new to nicehash and it's miner software, and if you have an asus router, you need to disable vulnerability protection.  I don't know how or why, but turning this off worked for me, and my miners are now hashing away merrily.  Moderators, please mark this thread as solved, so that it can help anyone else having this same problem. 

hi all...I am having a problem with mining eth and decred using nicehash miner.  I have a single rx 470, the benchmark for decred fails no matter what setting i use.  now, the other strange issue is that eth benchmark works, gives me a hashrate of 20.219, but the miner itself doesnt seem to be working.  It recognizes the GPU, says it connects to the ETH stratum server, then times out with this message:

"Socket was closed remotely(by pool)
ETH: job timeout, disconnect, retry in 20 sec...

I also tried using the version of the driver recommended by the miner, 16.12.2, but that didnt work either., and 15.12 doesnt install vga driver for my card, so i went with the latest one from amd.  Also, i am using nicehash miner v1.7.5.13, and i have tried the newest alpha 2.0 miner from them to no avail.  Please help!

hi all...I am having a problem with mining eth and decred using nicehash miner.  I have a single rx 470, the benchmark for decred fails no matter what setting i use.  now, the other strange issue is that eth benchmark works, gives me a hashrate of 20.219, but the miner itself doesnt seem to be working.  It recognizes the GPU, says it connects to the ETH stratum server, then times out with this message:

"Socket was closed remotely(by pool)
ETH: job timeout, disconnect, retry in 20 sec...

I also tried using the version of the driver recommended by the miner, 16.12.2, but that didnt work either., and 15.12 doesnt install vga driver for my card, so i went with the latest one from amd.  Also, i am using nicehash miner v1.7.5.13, and i have tried the newest alpha 2.0 miner from them to no avail.  Please help!

anyone have any info if there are any newer pools to mine this coin? 

anyone know where I can exchange coins to this?  I'm an avid supporter of donald trump and will gladly support this coin in his honor!  but ive been unable to find any exchanges for this coin.

Hi everyone,

As my title implies, is it feasible, or safe to run more than one instance of sgminer on my r9 280x?  I'm just curious as to whether or not doing this will cause any detrimental effect to my card or my PC?  One thing I was considering was to perhaps use one instance to control the temp and the fan while it mines one algorithm, and then use the second instance to mine a second algorithm, set them both at the same intensity, clock speeds etc, and thus mine two different algos one card?  is this possible, or am I just asking for my card to fry itself early?  the algos I am seeking to mine are x11 and x15.  Input and advice greatly appreciated!

i used to use that to mine feathercoin classic, but since that's scrypt based I can mine it with my asics...However IPC is not scrypt it is neoscrypt, so i cant use my scrypt asics to mine it, unfortunately.

also, on the x11 and x15 algorithms, when I tell sgminer to switch over to nicehash, it works flawlessly, as do my blizzards and gridseed using bfgminer.  I'm not sure what's wrong; I have been using the correct ports, so i dont think its that.

I have tried that, but now my gridseed blade and zeus blizzards wont connect on the scrypt port either, and they were working just fine a few days ago.  I'm completely at a loss.

my crevacoin and egc usernames wont connect either now.

also, I might add, the x11 and x15 miners worked just fine on crevacoin and egc payouts, so this is baffling to me.

Im having a problem connecting to my btc username with my x11, x15 and scrypt miners.  my sgminer for x11 and x15, on both instances, says, waiting for pools and after a while, "no servers could be found to get work from".  here is my config for the x11 miner:


{
"pools" : [
   {
      "url" : "stratum+tcp://mine.zpool.ca:3533",
      "user" : "1N4euqDASdAG5z1QWfv3BtfgNp3z3u6Rfo",
      "pass" : "x"
   }
]
,
"intensity" : "18",
"worksize" : "256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "0",
"gpu-threads" : "2",
"gpu-engine" : "750-1150",
"gpu-fan" : "100",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "50",
"gpu-vddc" : "0.000",
"temp-cutoff" : "80",
"temp-overheat" : "75",
"temp-target" : "70",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "7",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

and my conf for the x15 miner:

{
"pools" : [
   {
      "url" : "stratum+tcp://mine.zpool.ca:3733",
      "user" : "1N4euqDASdAG5z1QWfv3BtfgNp3z3u6Rfo",
      "pass" : "c=BTC"
   },
   {
      "url" : "stratum+tcp://x15.eu.nicehash.com:3339",
      "user" : "14vZ4DHDzhttzKyNAmLzpRq6VLmCGb16vX",
      "pass" : "password"
   },
   {
      "url" : "stratum+tcp://x15.eu.nicehash.com:3339",
      "user" : "14vZ4DHDzhttzKyNAmLzpRq6VLmCGb16vX",
      "pass" : "password"
   },
   {
      "url" : "stratum+tcp://x15.eu.nicehash.com:3339",
      "user" : "14vZ4DHDzhttzKyNAmLzpRq6VLmCGb16vX",
      "pass" : "password"
   }
]
,
"intensity" : "18",
"worksize" : "256",
"algorithm" : "bitblock",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "2048",
"gpu-threads" : "2",
"gpu-engine" : "750-1021",
"gpu-fan" : "0-100",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "80",
"temp-overheat" : "75",
"temp-target" : "70",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"no-client-reconnect" : true,
"queue" : "1",
"scan-time" : "60",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

is that username still active?  if so, what can I do to fix this?  thanks.

oh that's unfortunate.

you guys should consider setting up eth as a payout coin!

same problem for me.  I have about 1500 worth of TRUMP that have yet to show in my yobit wallet after a days worth of mining yesterday.  Please let us know when it is back up and running.

Hi, I am wondering if anyone is ahving the same issue as me with this transaction service:  www.coins-e.com.  The problem that I am having is this:  I have about 500,000 IPC in that exchange's wallet, and I cannot withdraw it.  No matter what ipc address I use, i receive a message from the site saying:  "Invalid address provided, Please check the address."  I know the addresses are valid, as they are from my IPC pc based wallet, and it has been fully synced up.  I'm just wondering if maybe these guys have scammed me out of my coins, or if there's some other way I can force a withdrawal from that exchange back to my wallet again?!  thanks.

and, when I try and mine with my gtx 760, the sm 3.0 model of ccminer with neoscrypt support says that the algorithm cannot be mined in sm 3.0 devices.  I have the latest cuda and drivers installed (automatically installs).