Search content
Sort by
Showing 5 of 5 results by DeVitto
Re: PhoenixMiner 2.7c: fastest Ethereum/Ethash miner with lowest devfee (Windows)
@PhoenixMiner
Thank you for your continuing development of this great miner
I found 2.7c very good although I had 1 problem today we had a power cut lost internet connection. Now that 2.7c is SSL enabled which we were using. We found that looking at console when the system loses internet connectivity the miner tries to resolve addresses, but it seems to look for port 4444 as though somewhere specified as default pool in the miner exe itself. It then hangs because it could not connect to that being SSL enabled. I didn't get chance to test again just stopped miner and restarted making sure we had connectivity and the miner carried on as normal.
What I have done now is set a fail over second pool being same eu address with 5555 in the hope that if it fails again in might try this before trying to resolve the 4444 port. Just a heads up if you need to look into this at all in the event that this might happen leaving the miner hanging.
The miner now reports on start up 4 pools specified. So somewhere there are 2 otherwise specified in the code I persume.
Thank you for your continuing development of this great miner
I found 2.7c very good although I had 1 problem today we had a power cut lost internet connection. Now that 2.7c is SSL enabled which we were using. We found that looking at console when the system loses internet connectivity the miner tries to resolve addresses, but it seems to look for port 4444 as though somewhere specified as default pool in the miner exe itself. It then hangs because it could not connect to that being SSL enabled. I didn't get chance to test again just stopped miner and restarted making sure we had connectivity and the miner carried on as normal.
What I have done now is set a fail over second pool being same eu address with 5555 in the hope that if it fails again in might try this before trying to resolve the 4444 port. Just a heads up if you need to look into this at all in the event that this might happen leaving the miner hanging.
The miner now reports on start up 4 pools specified. So somewhere there are 2 otherwise specified in the code I persume.
I had problems with bios battery which I replaced kept losing settings all time. I don't think there is much wrong with your setup check the bios settings again. I have never updated bios on motherboard perhaps there is something in any updates released?
I did have problems in windows when it took on the creators update. I am now on blockchain drivers 1 upgrade before creator. Had issues like you described on start menu etc.
I did have problems in windows when it took on the creators update. I am now on blockchain drivers 1 upgrade before creator. Had issues like you described on start menu etc.
I have the same on on my TB250pro doesn't really bother me to much if the 6 x 570's I have when running normal bios I can access bios, but if modded I only see display when I get to windows. I now have 6 1080ti's so making a 12 card rig which of course have no bios mods. I can see bios now all the way through.
James I would get HWINFO and take a look at the memory errors you are getting on your cards and reduce the overclock on the memory or increase the mv to 900 until the errors are reduced. I had one card that had a lot of memory errors I simply adjusted till I found they had gone then reflashed bios fixing to those settings.
I have a 12 card setup, but the rx570's pull 750w 167H/s ETH so your 1000w seems high. Mine are running 1075 1965 which I settled on for wattage.
I have a 12 card setup, but the rx570's pull 750w 167H/s ETH so your 1000w seems high. Mine are running 1075 1965 which I settled on for wattage.