Search content
Sort by
Showing 7 of 7 results by DesertRaven
Re: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner
My four are waiting at the UPS office to be picked up!! Woo Hoo!!!
Woo Hoo, congratulations!
Make sure to make a full inspection of the miners before putting them to work.
Happy mining!
Re: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner
Hi guys, Received my L3+ yesterday and I was so excited 
, however, the excitement didn't last for long, seam mu L3+ is now working only on 3 hashing boards 
Yesterday I notice that 4th board was having ASIC# 36 instead 72, and today when I powered up the miner only 3 hashing boards are showing.
Now what to do before writing to Bitmain???
I have tried switching on and off the miner and changing the PCI power connectors but no use.
I am using APW3++ on a 240V power grid.
Any advice is appreciated before I raise a ticket with Bitmain
, however, the excitement didn't last for long, seam mu L3+ is now working only on 3 hashing boards Yesterday I notice that 4th board was having ASIC# 36 instead 72, and today when I powered up the miner only 3 hashing boards are showing.
Now what to do before writing to Bitmain???
I have tried switching on and off the miner and changing the PCI power connectors but no use.
I am using APW3++ on a 240V power grid.
Any advice is appreciated before I raise a ticket with Bitmain
Double check if the PSU is feeding the 4th board with the appropriate power.
If that doesn't help, read issue 6 here:
https://bitmainhelp.zendesk.com/hc/en-us/articles/220872007-Possible-problems-for-Antminer-Troubleshooting-for-S7-S9-L3-
Tnx man, ok I did everything and the final outcome is: one hashing Board is Dead
Now I have removed the Hashing Board from the miner and packed it as instructed from Bitmain, but I have one confusion. When I go to raise the ticket for repair on the Bitmain site it asks me for the tracking No from the courier. Then I need to print two copies of the ticket and put one inside the box and attached the second one on the outside of the packet. So how can I get the tracking No before I take the packet to the courier, only after submission of the packet they will provide me the tracking No.
Does anyone have experience sending damage hashing bord to Hong Kong repair center? please help
P.S. the miner is working fine on 75% of its power so it gives around 377 mh/s, room temp is set on 250C, chip temp 54-59.
Re: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner
Hi guys, Received my L3+ yesterday and I was so excited , however, the excitement didn't last for long, seam mu L3+ is now working only on 3 hashing boards
Yesterday I notice that 4th board was having ASIC# 36 instead 72, and today when I powered up the miner only 3 hashing boards are showing.
Now what to do before writing to Bitmain???
I have tried switching on and off the miner and changing the PCI power connectors but no use.
I am using APW3++ on a 240V power grid.
Any advice is appreciated before I raise a ticket with Bitmain
, however, the excitement didn't last for long, seam mu L3+ is now working only on 3 hashing boards Yesterday I notice that 4th board was having ASIC# 36 instead 72, and today when I powered up the miner only 3 hashing boards are showing.
Now what to do before writing to Bitmain???
I have tried switching on and off the miner and changing the PCI power connectors but no use.
I am using APW3++ on a 240V power grid.
Any advice is appreciated before I raise a ticket with Bitmain
So happy to see this topic 
I have the exact same mobo, and I am planing to put 2 RX580 8GB whitout risers (directly on the PCIe x16 2.0)
Now, my question is: will the hasrate be the same as the GPU is plugged in to a mobo that is having PCIe 3.0.?
Please give me some idea, otherwise I will find ot by myself when I try
I have the exact same mobo, and I am planing to put 2 RX580 8GB whitout risers (directly on the PCIe x16 2.0)
Now, my question is: will the hasrate be the same as the GPU is plugged in to a mobo that is having PCIe 3.0.?
Please give me some idea, otherwise I will find ot by myself when I try
Hash rate is unaffected by the PCIe connector, video cards only need 1x PCIe to hash at full speed.
Thanks! This is very useful information!
So happy to see this topic
I have the exact same mobo, and I am planing to put 2 RX580 8GB whitout risers (directly on the PCIe x16 2.0)
Now, my question is: will the hasrate be the same as the GPU is plugged in to a mobo that is having PCIe 3.0.?
Please give me some idea, otherwise I will find ot by myself when I try
I have the exact same mobo, and I am planing to put 2 RX580 8GB whitout risers (directly on the PCIe x16 2.0)
Now, my question is: will the hasrate be the same as the GPU is plugged in to a mobo that is having PCIe 3.0.?
Please give me some idea, otherwise I will find ot by myself when I try
Ja ti mogu dati odgovor samo na 2. pitanje
Vise nego dovoljno
Vise nego dovoljno
Havala!
Zdravo svima!
Pitanje #1: da li se smanjuje hashrate na rx580 ako je stavim na stariju plocu koja ima samo PCI-E 2.0?
Pitanje #2 da li je dovoljno napajanje corsair od 850W za dve sappihre rx5800 8GB? Uz to bi iso i i7 930.
Pitanje #3: da li je realno u ovom trenutku platiti 35000rsd za polovnu sapphire RX580 8GB?
Pitanje #1: da li se smanjuje hashrate na rx580 ako je stavim na stariju plocu koja ima samo PCI-E 2.0?
Pitanje #2 da li je dovoljno napajanje corsair od 850W za dve sappihre rx5800 8GB? Uz to bi iso i i7 930.
Pitanje #3: da li je realno u ovom trenutku platiti 35000rsd za polovnu sapphire RX580 8GB?