Ninjastic
Search content
Sort by
Showing 20 of 126 results by GEBucky
Post
Topic
Board Exchanges
Re: Is changelly trustworthy?.... Funds gone :(
by
GEBucky
on 01/08/2020, 23:57:42 UTC
Quote from: GEBucky on Today at 07:54:24 PM
Quote from: GEBucky on Today at 07:51:18 PM
Quote from: elda34b on Today at 06:16:50 AM
Quote from: GEBucky on July 31, 2020, 11:49:56 PM
So they took my TUSD and exchanged it but it's been held for 15 hours due to "technical issues" with the wallet.
That sucks. I'd be okay with that if they fixed the rate when you made the exchange, but if they don't then it really is annoying. Technical issues card is really shady too if it keeps showing up here and there. Hopefully they don't play KYC card with you.
The assured me it isn't a KYC issue, that the exchange had taken place, and there were technical issues with sending the dai. I just did a tusd to dai and it took 2 minutes. I think they got trapped with the quoted rate and did the exchange and don't have their dai maybe (really tight supply due to yield farming). $20K is a decent amount of money and they clearly aren't telling me the entire story. I would NEVER use this exchange again. Never had a problem with any of the dex - just did changelly as tusd isn't quite as common in defi and the rate was better. Not sure why anyone would use them after something like this. Not like I used a non-reusable address.
lol - this is s the latest after I told them i just did an identical transaction with my wife's account:
""Dear Customer,

Thank you for your query.
​
The issue affected the old transactions only (1-3 days old ones), all the current DAI payouts are going through smoothly.
​
As for your case, it is examined now.
​
Please kindly wait until any news appears. :

lol - right


Hey - at least they resolved the issue and the funds were delivered. 48 hours later
Post
Topic
Board Exchanges
Re: Is changelly trustworthy?.... Funds gone :(
by
GEBucky
on 01/08/2020, 19:54:24 UTC
Quote from: GEBucky on Today at 07:51:18 PM
Quote from: elda34b on Today at 06:16:50 AM
Quote from: GEBucky on July 31, 2020, 11:49:56 PM
So they took my TUSD and exchanged it but it's been held for 15 hours due to "technical issues" with the wallet.
That sucks. I'd be okay with that if they fixed the rate when you made the exchange, but if they don't then it really is annoying. Technical issues card is really shady too if it keeps showing up here and there. Hopefully they don't play KYC card with you.
The assured me it isn't a KYC issue, that the exchange had taken place, and there were technical issues with sending the dai. I just did a tusd to dai and it took 2 minutes. I think they got trapped with the quoted rate and did the exchange and don't have their dai maybe (really tight supply due to yield farming). $20K is a decent amount of money and they clearly aren't telling me the entire story. I would NEVER use this exchange again. Never had a problem with any of the dex - just did changelly as tusd isn't quite as common in defi and the rate was better. Not sure why anyone would use them after something like this. Not like I used a non-reusable address.
lol - this is s the latest after I told them i just did an identical transaction with my wife's account:
""Dear Сustomer,

Thank you for your query.
​
The issue affected the old transactions only (1-3 days old ones), all the current DAI payouts are going through smoothly.
​
As for your case, it is examined now.
​
Please kindly wait until any news appears. :

lol - right
Post
Topic
Board Exchanges
Re: Is changelly trustworthy?.... Funds gone :(
by
GEBucky
on 01/08/2020, 19:51:18 UTC
Quote from: elda34b on Today at 06:16:50 AM
Quote from: GEBucky on July 31, 2020, 11:49:56 PM
So they took my TUSD and exchanged it but it's been held for 15 hours due to "technical issues" with the wallet.
That sucks. I'd be okay with that if they fixed the rate when you made the exchange, but if they don't then it really is annoying. Technical issues card is really shady too if it keeps showing up here and there. Hopefully they don't play KYC card with you.
The assured me it isn't a KYC issue, that the exchange had taken place, and there were technical issues with sending the dai. I just did a tusd to dai and it took 2 minutes. I think they got trapped with the quoted rate and did the exchange and don't have their dai maybe (really tight supply due to yield farming). $20K is a decent amount of money and they clearly aren't telling me the entire story. I would NEVER use this exchange again. Never had a problem with any of the dex - just did changelly as tusd isn't quite as common in defi and the rate was better. Not sure why anyone would use them after something like this. Not like I used a non-reusable address.
Post
Topic
Board Exchanges
Re: Is changelly trustworthy?.... Funds gone :(
by
GEBucky
on 31/07/2020, 23:49:56 UTC
I certainly have some serious doubts as to the integrity of their operations. I exchanged TUSD for DAI knowing DAI was 4pct off it's peg and fully intended to leverage that. So they took my TUSD and exchanged it but it's been held for 15 hours due to "technical issues" with the wallet. Meanwhile all other ERC20 tokens are working fine. Now it's down 1pct and likely falling while they continue to assure me it will be resolved. It was a pretty large amount. Sure looks like they are playing the spread on a stable coin that's off it's peg. Not very cool in my opinion, nor very ethical. Stay away.
Post
Topic
Board Mining (Altcoins)
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
by
GEBucky
on 07/12/2019, 19:15:20 UTC
Quote from: nordmann666 on December 07, 2019, 08:01:04 AM
GMiner wont work anymore...awesome want to start v 1.84 but there is only 1.83

You can just go to managed software and edit Gminer then select version 1.83. It will then work as before.
Post
Topic
Board Mining (Altcoins)
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
by
GEBucky
on 30/11/2019, 08:49:51 UTC
Has anyone configured Bminer with f2pool on Grin31? I think I have tried every configuration I can think of in AM. Gminer works great. But would love to try Bminer. Thanks
Post
Topic
Board Announcements (Altcoins)
Re: [ANN][POW/POS] VHS: Distributed Computing [0 premine, no presale]
by
GEBucky
on 13/07/2019, 03:20:36 UTC
This one is dead for sure. Bummer but not too surprising given the complete lack of any demonstrated capability. Well - at least I shut the MN down. Chain has been dead for over 2 weeks. Scammers for sure.
Post
Topic
Board Services
Re: Crypto Marketplace ~ Escrow Service ~ OTC ~ Discord Marketplace ~
by
GEBucky
on 07/07/2019, 06:11:11 UTC
Quote from: TMAN on July 06, 2019, 08:57:06 AM
I’d rather tag and remove once proven wrong than ignore and have someone lose funds. I’ll check this out more thoroughly this afternoon and if I am incorrect I’ll remove the tag and apologise. Plus you will of got some free publicity. So keep nickers in a twist and remember there are plenty of dishonest people who want to scam newbies
Totally a fair point.
Post
Topic
Board Services
Re: Crypto Marketplace ~ Escrow Service ~ OTC ~ Discord Marketplace ~
by
GEBucky
on 06/07/2019, 06:06:27 UTC
Quote from: kingcolex on July 06, 2019, 03:16:59 AM
Quote from: GEBucky on July 06, 2019, 03:06:46 AM
Quote from: TMAN on July 06, 2019, 01:06:22 AM
No post here, you are advertising here. Also how was it resolved?
Dude - get a life. Not sure how dialed into the FPGA or mining communities you are, but why you just insist on calling bullshit is incredible. Dream has a fantastic reputation in the FPGA community. Oh, they are actually used for MINING.  If you had a bad experience then by all means speak up. If you did not, then shut up Smiley. One bad comment does not make for a bad service and I have no idea why you are even weighing in on this. Just taking a comment (that you have zero context on) and trolling isn't helpful to anyone
Let's all calm down, TMAN is trying to do the right thing and watch out for the community, we can't expect everyone to know about seperate discord channels. Let's all just calm down, and relax, we all want the same thing here, less scamming in the crypto community. That's why we even have escrow services and it's why people are tagged.

So let's relax, give TMAN some time to check out the discord if they want or they can believe my experience (or not, it's up to them) but there is plenty of evidence for dream we don't need people to attack each other.

I am quite relaxed and calm. I just find it frustrating that one persons comments made because they didn't get their way in a pretty ridiculous situation is in anyway influencing a good service. I don't have a dog in this hunt but just seems like the Spanish Inquisition over what essentially was a pissed off troller. All good. I would just hope people would be a little more thoughtful and thorough before just passing though noise. I understand the need to ensure the safety and security of Escrow. I also think there is a civilized and courteous way about protecting it, as opposed to a thoroughly dismissive approach. Thought we were all trying to head to a place where there weren't autocrats.
Post
Topic
Board Services
Re: Crypto Marketplace ~ Escrow Service ~ OTC ~ Discord Marketplace ~
by
GEBucky
on 06/07/2019, 03:06:46 UTC
Quote from: TMAN on July 06, 2019, 01:06:22 AM
No post here, you are advertising here. Also how was it resolved?
Dude - get a life. Not sure how dialed into the FPGA or mining communities you are, but why you just insist on calling bullshit is incredible. Dream has a fantastic reputation in the FPGA community. Oh, they are actually used for MINING.  If you had a bad experience then by all means speak up. If you did not, then shut up Smiley. One bad comment does not make for a bad service and I have no idea why you are even weighing in on this. Just taking a comment (that you have zero context on) and trolling isn't helpful to anyone
Post
Topic
Board Services
Re: Crypto Marketplace ~ Escrow Service ~ OTC ~ Discord Marketplace ~
by
GEBucky
on 06/07/2019, 03:02:42 UTC
Quote from: DreamBlob on July 06, 2019, 01:35:11 AM
Quote from: TMAN on July 06, 2019, 01:06:22 AM
No post here, you are advertising here. Also how was it resolved?
I can't show proof of ongoing trades here... you need to join the discord. I would add you to the trade with both parties' permissions and then remove access once you have looked at it, it would intrude on people's privacy if I posted the entire chat log here...

He started asking people to dox me because his escrow funds were not returned "immediately" They were sent back within 5 days because I had to exchange my fee from BTC back to USDT to send it back.
Post
Topic
Board Services
Re: Crypto Marketplace ~ Escrow Service ~ OTC ~ Discord Marketplace ~
by
GEBucky
on 05/07/2019, 20:28:43 UTC
In agree. Don’t sweat the haters - you have plenty of folks that know and trust you and your excellent service. Gotta love crucial from someone who didn’t know FPGAs were used for mining. Lol. “Not Bitcoin for some time”. Excellent point if anyone had said they were used to mine btc. Morons.
Post
Topic
Board Mining (Altcoins)
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
by
GEBucky
on 07/05/2019, 04:03:04 UTC
Please post the remote agent files either here or on your website before upgrades. I have a rig that won't auto upgrade. Thanks!
Post
Topic
Board Announcements (Altcoins)
Re: [ANN][POW/POS] VHS: Distributed Computing [0 premine, no presale]
by
GEBucky
on 23/03/2019, 09:05:33 UTC
If  MCT is any indication, then would seem that there is a lack of demand for VHS. Bummer as am very excited about the project but needs to see some traction and have the dumping stop
Post
Topic
Board Announcements (Altcoins)
Re: [ANN][POW/POS] VHS: Distributed Computing [0 premine, no presale]
by
GEBucky
on 19/03/2019, 14:43:47 UTC
Is there information anywhere on how to setup a Masternode?


Thanks
Post
Topic
Board Services
Re: Escrow for anything via discord by Dream (fpga channel mod)
by
GEBucky
on 06/03/2019, 20:52:36 UTC
Quote from: Truthchanter on March 04, 2019, 11:05:53 PM
Hey all,

As you can see in my Bitcointalk profile, I am a reputable member with 9 or so positive trust reviews from deals/trades i've done here, some with escrow and some without. And I have 0 negative reviews.

Currently on discord, I am doing a deal with someone (I'm the seller) and using Dream as an escrow. Once the deal is complete (shipping is supposed to take another 1-2 weeks), I can return and edit this post with an honest review of Dream's discord escrow service (and I'll give him trust feedback review in his bitcointalk profile)

Post
Topic
Board Services
Re: Escrow for anything via discord by Dream (fpga channel mod)
by
GEBucky
on 06/03/2019, 20:48:25 UTC
Highly recommend Dream personally and the service! Thanks Dream - a much needed and very useful service.
Post
Topic
Board Mining (Altcoins)
Re: [ANN]Bminer: a fast Equihash/Ethash/CuckooCycle miner for AMD/NVIDIA GPUs 12.1.0
by
GEBucky
on 20/01/2019, 21:18:08 UTC
I am getting 1% or less rejects on f2pool with 3 1080ti rig. CPU usage is about 40pct on both cores: CPU Type   DualCore Intel Pentium G4400T, 2900 MHz (29 x 100). Have 12GB RAM and 30GB Virtual Memory on Windows 10. GPU utilization is 99pct on all 3.

Note that if anyone is going through MRR as a proxy you are going to get high rejects on grinmint - need to use f2pool it that's how you are configured.
Post
Topic
Board Mining (Altcoins)
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
by
GEBucky
on 14/01/2019, 07:08:40 UTC
Quote from: baf28 on January 14, 2019, 03:52:22 AM
Quote from: citronick on January 14, 2019, 03:47:58 AM
Quote from: baf28 on January 14, 2019, 03:05:10 AM
Quote from: GEBucky on January 13, 2019, 11:16:13 PM
Hi @Patrik. Thanks for including the latest version of gminer!. I had been using 1.18 manually. Given the somewhat odd way that gminer accepts parameters, I just created a pool for Leafpool and left everything blank except us.leafpool.com. Then configured each managed miner and passed everything through command line:

--algo 150_5 --server beam-us.leafpool.com --port 3333 --ssl 1 --api 10050 --user 228c0952842698bffd2b1bce30ad2c612b6fc6exxx2a4fc4559aa2209a6b1b211e9.rig1/myname@yahoo.com

I can't seem to get a "standard config" working with the new gminer. I would think I could pull port and put that in the pool definition as standard ":3333", and put wallet address there. On each miner profile then add worker name/email.

for some reason it wont start under that configuration. It attempts to start the miner but gets a connection timeout on us.leafpool.com:3333.  I can just leave it manual for now but would like to move to using the standard download.

I there anything unique to the gminer setup other than what I outlined above?

Thanks

I apologize, I did everything in a standard way, but I do not know how to post images of screenshots, please follow my links, everything is shown there. Thank.







Bump for you.... and your images looks like not supported.

https://yadi.sk/i/F2NsXSwb4PSgqA
https://yadi.sk/i/t3SwW5soDaC1AA
https://yadi.sk/i/us4ZpKaNXeseqA

Those appear to just be screenshots of the working miner. I was looking for specifics on the configuration. Thanks though.
Post
Topic
Board Mining (Altcoins)
Re: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners
by
GEBucky
on 13/01/2019, 23:16:13 UTC
Hi @Patrik. Thanks for including the latest version of gminer!. I had been using 1.18 manually. Given the somewhat odd way that gminer accepts parameters, I just created a pool for Leafpool and left everything blank except us.leafpool.com. Then configured each managed miner and passed everything through command line:

--algo 150_5 --server beam-us.leafpool.com --port 3333 --ssl 1 --api 10050 --user 228c0952842698bffd2b1bce30ad2c612b6fc6exxx2a4fc4559aa2209a6b1b211e9.rig1/myname@yahoo.com

I can't seem to get a "standard config" working with the new gminer. I would think I could pull port and put that in the pool definition as standard ":3333", and put wallet address there. On each miner profile then add worker name/email.

for some reason it wont start under that configuration. It attempts to start the miner but gets a connection timeout on us.leafpool.com:3333.  I can just leave it manual for now but would like to move to using the standard download.

I there anything unique to the gminer setup other than what I outlined above?

Thanks