Search content
Sort by
Showing 7 of 7 results by Giantppl
You can try using a different socket for the individual asic. It could be the problem mine I suspect its the WiFi plug that stopped my miner.. tried it today and it stopped after its fixed..
Has anyone had an issue where only one ASIC is showing up? Very frustrating to say the least.
Just got mine fixed also, Guy was helping me install some software thru remote and reboot the System and worked.. like I said Im not tech savvy enuf.. but both running well now! Innosilicon rocks and after sales support is superb!
WOOT WOOT...I'm mining.
I had an Innosilicon tech remote into my system and got it running. He was able to determine my A4+ wasn't connecting to the internet correctly. The culprit was the Network Gateway; once he put in the correct one (router's IP address) into the gateway field, I started mining.
Hope this helps others who were having spinning Miner Status page like I was.
I had an Innosilicon tech remote into my system and got it running. He was able to determine my A4+ wasn't connecting to the internet correctly. The culprit was the Network Gateway; once he put in the correct one (router's IP address) into the gateway field, I started mining.
Hope this helps others who were having spinning Miner Status page like I was.
Im lost once I got to the third paragraph... will see if innosilicon gets back to me..
I think T3 is for the A5 miner, so here is stuff that works for my A4+
When you first telnet to the miner (192.168.1.xxx:8100) and login (root:t1t2t3a5)
Check if it is even trying to mine (ps|grep innominer)
it should look the same as a properly configured launch string i.e. (minus the bit on the end):
innominer_T2 -o stratum+tcp://scrypt.mine.zpool.ca:3433 -u 1BPiRf942duu8AqFQGoRVwz4WGHn3APLm8 -p "c=BTC" -o stratum+tcp://hub.miningpoolhub.com:12001 -u gazdac.201 -p "x" --A1Pll1 1100 --A1Pll2 1100 --A1Pll3 1100 --A1Pll4 1100 --A1Pll5 1100 --A1Pll6 1100 --A1Pll7 1100 --A1Pll8 1100 --A1Vol1 18 --A1Vol2 18 --A1Vol3 18 --A1Vol4 18 --A1Vol5 18 --A1Vol6 18 --A1Vol7 18 --A1Vol8 18 --A1Fanmode 1 --A1Fanspd 3 --api-listen --syslog >/dev/null 2>&1
note this launch string resides in: /tmp/run.sh whenever you want to restart the miner just type (/tmp/run.sh) and it will restart the process (5 minute start up time)
If it isn't running and/or your launch string is not correct you have to fix the python config files (see 2)
(1)If it is running you can watch the logs real time (tail -50 /tmp/log/innominer.log -f) (remember to ctrl+c to stop watching) you won't see it in the webui unless you get all the way to starting mining (5+ minutes)
I have no idea what to do if it is running and configured properly, other than up the voltages (lower number)
(2)so if you run /tmp/run.sh is wrong or it isn't in ps at all. then config is screwed up.
To transfer files I just copied and pasted the broken parts.
Looks like it has ftp available as well.
https://busybox.net/downloads/BusyBox.html
look for ftpd or ftpget/ftpput
remember you have to mount / -o rw,remount to edit files
uhh this was TMI for everyone probably. just confusing you all more.
Below is the debug log, I'm assuming this is not good.
For Newbies: I telnet in, and use the 1st and 3rd line to run the debug.
For Newbies: I telnet in, and use the 1st and 3rd line to run the debug.
Code:
cd /bin
root@miner/bin:
./innominer_T3 --debug
:)
root@miner/bin:
./innominer_T3 --debug
:)
I think T3 is for the A5 miner, so here is stuff that works for my A4+
When you first telnet to the miner (192.168.1.xxx:8100) and login (root:t1t2t3a5)
Check if it is even trying to mine (ps|grep innominer)
it should look the same as a properly configured launch string i.e. (minus the bit on the end):
innominer_T2 -o stratum+tcp://scrypt.mine.zpool.ca:3433 -u 1BPiRf942duu8AqFQGoRVwz4WGHn3APLm8 -p "c=BTC" -o stratum+tcp://hub.miningpoolhub.com:12001 -u gazdac.201 -p "x" --A1Pll1 1100 --A1Pll2 1100 --A1Pll3 1100 --A1Pll4 1100 --A1Pll5 1100 --A1Pll6 1100 --A1Pll7 1100 --A1Pll8 1100 --A1Vol1 18 --A1Vol2 18 --A1Vol3 18 --A1Vol4 18 --A1Vol5 18 --A1Vol6 18 --A1Vol7 18 --A1Vol8 18 --A1Fanmode 1 --A1Fanspd 3 --api-listen --syslog >/dev/null 2>&1
note this launch string resides in: /tmp/run.sh whenever you want to restart the miner just type (/tmp/run.sh) and it will restart the process (5 minute start up time)
If it isn't running and/or your launch string is not correct you have to fix the python config files (see 2)
(1)If it is running you can watch the logs real time (tail -50 /tmp/log/innominer.log -f) (remember to ctrl+c to stop watching) you won't see it in the webui unless you get all the way to starting mining (5+ minutes)
I have no idea what to do if it is running and configured properly, other than up the voltages (lower number)
(2)so if you run /tmp/run.sh is wrong or it isn't in ps at all. then config is screwed up.
For those that might have the same problem. Looks like my a4+ corrupted files during a reboot then stopped working.
/home/inno_tools/start_miner.py
The damn thing deleted a couple characters and killed itself.
Here's what the file looked like
vi /lib/python3.4/_sysconfigdata.py...
'HAVE_GETLOGIN': 1,
'HAVE_GETNAMEINFO': 1,
'HAVE_GETPAGESIZE': 1,
E_GETPEERNAME': 1,
'HAVE_GETPGID': 1,
'HAVE_GETPGRP': 1,
...
There might have been more errors, i dunno. I coped the file from another miner and now it works.
Symptoms were the HTTP control page loading, but not showing any data e.g. not showing me "miner type" under system.
I found the file by manually running each of the commands in /etc/init.d/rcS
Good luck to the rest of you.
/home/inno_tools/start_miner.py
The damn thing deleted a couple characters and killed itself.
Here's what the file looked like
vi /lib/python3.4/_sysconfigdata.py...
'HAVE_GETLOGIN': 1,
'HAVE_GETNAMEINFO': 1,
'HAVE_GETPAGESIZE': 1,
E_GETPEERNAME': 1,
'HAVE_GETPGID': 1,
'HAVE_GETPGRP': 1,
...
There might have been more errors, i dunno. I coped the file from another miner and now it works.
Symptoms were the HTTP control page loading, but not showing any data e.g. not showing me "miner type" under system.
I found the file by manually running each of the commands in /etc/init.d/rcS
Good luck to the rest of you.
To transfer files I just copied and pasted the broken parts.
Looks like it has ftp available as well.
https://busybox.net/downloads/BusyBox.html
look for ftpd or ftpget/ftpput
remember you have to mount / -o rw,remount to edit files
uhh this was TMI for everyone probably. just confusing you all more.
I'm really an illiterate when it comes to tech. the miner status just keeps spinning and not even loading anything..
is there a way where I can copy the files from the working A4+ to the not working one? I do suspect its the software issue.
What's your System Version info, mine are:
Miner Type: 17
Hw Version: G19
Build Date: Thur Dec 21 17:56:17 CST 2017
Platform Version: 810e0c2934044ec019b1d929d3de1f3c899b6410
Rootfs Version: 4973e48bd7ab0bb58688ce4845bd7b2b532429f7
Mine is the same 17 and G19 just the date is 29 dec instead
I'm on the same Build Date as you, found the 17-12-29 build off the support site. The good thing now, it doesn't sound like a drone trying to take off.
Weird thing, on their support site, their screenshots shows "Cgminer Version" "Sgminer Version" mine does not, does yours?
is there a way where I can copy the files from the working A4+ to the not working one? I do suspect its the software issue.
Same here miner status is constantly loading.. no hash rate showed at the pool. Tried to upgrade the software but it stops at 10% and when u refresh the page its gone.
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
What's your System Version info, mine are:
Miner Type: 17
Hw Version: G19
Build Date: Thur Dec 21 17:56:17 CST 2017
Platform Version: 810e0c2934044ec019b1d929d3de1f3c899b6410
Rootfs Version: 4973e48bd7ab0bb58688ce4845bd7b2b532429f7
Mine is the same 17 and G19 just the date is 29 dec instead
I'm on the same Build Date as you, found the 17-12-29 build off the support site. The good thing now, it doesn't sound like a drone trying to take off.
Weird thing, on their support site, their screenshots shows "Cgminer Version" "Sgminer Version" mine does not, does yours? Same here miner status is constantly loading.. no hash rate showed at the pool. Tried to upgrade the software but it stops at 10% and when u refresh the page its gone.
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
What's your System Version info, mine are:
Miner Type: 17
Hw Version: G19
Build Date: Thur Dec 21 17:56:17 CST 2017
Platform Version: 810e0c2934044ec019b1d929d3de1f3c899b6410
Rootfs Version: 4973e48bd7ab0bb58688ce4845bd7b2b532429f7
Mine is the same 17 and G19 just the date is 29 dec instead
Same here miner status is constantly loading.. no hash rate showed at the pool. Tried to upgrade the software but it stops at 10% and when u refresh the page its gone.
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..
Any idea how to flash it? I have another A4+ working well. Any advice greatly appreciated..