Search content
Sort by

Showing 19 of 19 results by HDutchie
Post
Topic
Board Hardware
Re: ANTMINER C1 Discussion and Support Thread
by
HDutchie
on 18/05/2015, 04:26:29 UTC
Okay...even worse now. The fan on my miner never turns off and there is a red light near the ethernet connector. Can anyway give me a stock C1.img or a network.conf with DHCP? ASAP


It seems deliberate as if to dissuade. 

And no, simply flashing the card wouldn't give me the fix I need.  It would be in the .1.0 network after flashing the card unless you have an idea how to reset the 192.168.1.99 to another subnet on the card before it goes in the machine.

So, no.  Holding the reset for 90 seconds brings it to that, 192.168.1.99,  state.

The S5's wake up to DHCP so subnets are not a problem.  But water cooled has lower temps than hard fan like the S5.

My C1 image with DHCP setting

www.perearstike.ee/C1/C1first.zip

You can use it.

Another one here if anyone needs it, quite an old firmware so will need updating.

/BlhRdE]SD image in case of corruption. | That image is set to DHCP so visit your router to find the IP assigned.

Wow...I know I shouldn't have said even worse...now the fluid tube into my miner exploded...it wasn't even mining! Just sitting idle!!! With fans on...
Post
Topic
Board Hardware
Re: ANTMINER C1 Discussion and Support Thread
by
HDutchie
on 17/05/2015, 17:17:57 UTC
Okay...even worse now. The fan on my miner never turns off and there is a red light near the ethernet connector. Can anyway give me a stock C1.img or a network.conf with DHCP? ASAP
Post
Topic
Board Hardware
Re: ANTMINER C1 Discussion and Support Thread
by
HDutchie
on 10/05/2015, 17:48:12 UTC
Alright, I've got a major issue with one of my C1s.
http://i.imgur.com/IvkrVCh.png
This miner was working fine last week. I can't for the life of me figure out why this is hapenning.
Post
Topic
Board Announcements (Altcoins)
Re: [ANN][TIT] Titcoin | general Info, News and Updates | (. Y .)
by
HDutchie
on 21/01/2015, 01:46:16 UTC
Any list of estabishment where in titcoin is being accepted? Any list of porn site subscriptions?
Check their website.
Post
Topic
Board Announcements (Altcoins)
Re: [ANN] Squarebit | Bittrex | Roadmap | Electrum | 1,1 million coins
by
HDutchie
on 18/01/2015, 16:32:58 UTC
Still need some more pools?
Post
Topic
Board Pools (Altcoins)
Topic OP
[ANN] [BETA]Harm's Swimming Pool-A Titcoin pool!
by
HDutchie
on 18/01/2015, 01:34:16 UTC
I would really appreciate it if you guys/girls/both ( Wink) checked out my Titcoin pool, here. I have been working on this for a while now, and am really proud that I managed to fit it into my school schedule (I'm only 12!). I only have a 1% fee, and the only reason I did this is to help support the server and electricity costs. I also have a stratum server, either 8.28.153.3 or rewq.us.to, port 3333. So thanks for reading and have a great day!
Post
Topic
Board Announcements (Altcoins)
Re: [ANN][TIT] Titcoin | general Info, News and Updates | (. Y .)
by
HDutchie
on 18/01/2015, 01:05:49 UTC
Thanks!  Smiley
Alright, web frontend is up and working at this page. I also have made a node at 8.28.153.3!
Post
Topic
Board Announcements (Altcoins)
Re: [ANN][TIT] Titcoin | general Info, News and Updates | (. Y .)
by
HDutchie
on 17/01/2015, 22:05:38 UTC

Website: http://www.titcoins.biz / http://www.titcoin.xxx
E-mail: support [at] titcoins.biz
Facebook: http://www.facebook.com/titcoin
Twitter: @OfficialTitcoin @TitcoinNEWS @TitcoinMAGAZINE
 

Titcoin is a crypto-currency that was designed specifically for the $10 billion adult entertainment industry where privacy and anonymity are key consumer factors. Titcoin gives consumers the ability to make discreet micropayments while benefiting businesses with extremely low transaction fees.

Originally conceived in November 2013, Titcoin was officially announced in January 2014 with a final build of the wallet compiled in February. Titcoin was formally launched to the public on June 21, 2014.

Titcoin was developed by a small group of cryptocurrency advocates who saw the adult entertainment industry as the perfect conduit for bringing digital currency into the mainstream. We are a team that consists of seasoned professionals with years of experience in digital marketing, finance, business development and technology.

Our primary goal is to raise awareness of the cryptocurrency industry and increase greater public adoption of alternate forms of currency. We believe Titcoin will help all of us by creating strong cryptocurrency demand in an industry where anonymity and privacy are key drivers.

Finally, we believe in transparency. We are an independent group of enthusiasts who are very active in the cryptocurrency community. Plus we have a history of giving back to the community through giveaways, bounties and rewards. What you see is what you get, and we are more than happy to answer any questions about our objectives and long-term vision.

The Titcoin development team is a 5 Plus+ PoD (Proof of Developer) rated organization.
http://www.titcoins.biz/wp-content/uploads/2014/07/ratingTIT.jpg
 

Specifications

Algorithm: SHA-256
Block Reward: 69 coins
Block Time: 1 minutes (60 seconds)
Total Coins: 69,000,000
Retarget: Every block (DigiShield)
Halving Interval: 500,000 blocks

P2P/RPC Port: 8698/8697
 
Titcoin launched on June 21st, 2014. A variety of mining pools and currency exchanges are currently available.

The coin is established which puts us in a better place to reopen negotiations with potential partners. In the mean time several articles appeared and more might follow. Negotiations are still ongoing. Note that we are not only aiming for the cryptocoin community but are trying to get awareness on the mass market.
 

Titcoin Windows Wallet v1.0.0(Mac, Windows and GitHub source:

  http://www.titcoins.biz/titcoin-wallet/
 

Mining Pools:

    http://ispace.co.uk
    https://mupool.com
    http://titcoin.slugmonkeypool.net
    https://www.minep.it
    http://tit.minerpools.com
    http://www.kinkypool.com
 

Nodes:


addnode=seed.titcoins.info
addnode=titcoin.hopto.org
addnode=titcoin.isasecret.com
addnode=titcoin.slyip.com
addnode=titcoin.sytes.net
addnode=108.61.10.90
addnode=95.85.23.9
addnode=109.120.173.59
addnode=188.165.84.239

 

Block Explorer:

    http://blockexperts.com/tit

Exchanges:

 
AllCoin: https://www.allcoin.com

Bittrex: https://bittrex.com

BleuTrade: https://bleutrade.com

Cryptex: https://www.cryptex.biz

Cryptsy: https://www.cryptsy.com

RockyTrade: https://www.rockytrade.net

 

Payment Processors:


CoinPayments.net: http://www.coinpayments.net

CoinShipIt: http://www.coinshipit.com

CoinToPay: https://www.cointopay.com

Casheer: http://www.casheer.net (Coming Soon)
New pool for you guys! I'm currently working on the frontend, but the pool and payout system is running. The stratum is rewq.us.to:3333
Happy hashing!
Post
Topic
Board Archival
Re: Pictures of your mining rigs!
by
HDutchie
on 16/01/2015, 22:19:31 UTC
not really. i pay 0.064 and it was not worth it at ~$330 BTC

dpends on how optimistic you are regarding price and network difficulty growth slowing down over the next 12 months. At $0.13 USD/kwh my assumptions include >$1000 by 2016 and difficulty growth sticking around 4-5%/jump for the next while, at least until price growth. Theres also the fact that hardware often sells used for 2-3x its mining value near the end of its life. Right now, S3 units are still selling for $200 and the S1 goes for ~$50 on sites like kijiji, craigslist, ebay, despite the fact you can get new hardware that is similar hashrates but more efficient for similar $/GH.

all i can say is good luck to you LOL. im not going to pay $700 a month in power bills hoping to make money some time down the road maybe (probably not)

s1 are not going for $50 on ebay. maybe in including shipping.

i sold 70+ of them for about $20-$25 on ebay a couple weeks ago.

and the s3s for $150-$180 including shipping
No one realizes that all you have to do is make friends with some guys in the dorm for free utilities!
I have never heard of a dorm where utilities aren't free, but it is usually archaic wiring. (I had a laptop catch fire from an electric surge)
If you can survive for four months, then you've paid off your miner!
Eh, just get a surge protector power strip thingy...
Get a good one, high amount of joules protection. At least with my university they required mac address to connect to the network, you might have to run the miners through a pi and at worst case scenario buy a hotspot.
Ditto. None of those "much super quality" ones
Post
Topic
Board Archival
Re: Pictures of your mining rigs!
by
HDutchie
on 16/01/2015, 21:24:41 UTC
not really. i pay 0.064 and it was not worth it at ~$330 BTC

dpends on how optimistic you are regarding price and network difficulty growth slowing down over the next 12 months. At $0.13 USD/kwh my assumptions include >$1000 by 2016 and difficulty growth sticking around 4-5%/jump for the next while, at least until price growth. Theres also the fact that hardware often sells used for 2-3x its mining value near the end of its life. Right now, S3 units are still selling for $200 and the S1 goes for ~$50 on sites like kijiji, craigslist, ebay, despite the fact you can get new hardware that is similar hashrates but more efficient for similar $/GH.

all i can say is good luck to you LOL. im not going to pay $700 a month in power bills hoping to make money some time down the road maybe (probably not)

s1 are not going for $50 on ebay. maybe in including shipping.

i sold 70+ of them for about $20-$25 on ebay a couple weeks ago.

and the s3s for $150-$180 including shipping
No one realizes that all you have to do is make friends with some guys in the dorm for free utilities!
I have never heard of a dorm where utilities aren't free, but it is usually archaic wiring. (I had a laptop catch fire from an electric surge)
If you can survive for four months, then you've paid off your miner!
Eh, just get a surge protector power strip thingy...
Post
Topic
Board Archival
Re: Pictures of your mining rigs!
by
HDutchie
on 16/01/2015, 08:25:00 UTC
not really. i pay 0.064 and it was not worth it at ~$330 BTC

dpends on how optimistic you are regarding price and network difficulty growth slowing down over the next 12 months. At $0.13 USD/kwh my assumptions include >$1000 by 2016 and difficulty growth sticking around 4-5%/jump for the next while, at least until price growth. Theres also the fact that hardware often sells used for 2-3x its mining value near the end of its life. Right now, S3 units are still selling for $200 and the S1 goes for ~$50 on sites like kijiji, craigslist, ebay, despite the fact you can get new hardware that is similar hashrates but more efficient for similar $/GH.

all i can say is good luck to you LOL. im not going to pay $700 a month in power bills hoping to make money some time down the road maybe (probably not)

s1 are not going for $50 on ebay. maybe in including shipping.

i sold 70+ of them for about $20-$25 on ebay a couple weeks ago.

and the s3s for $150-$180 including shipping
No one realizes that all you have to do is make friends with some guys in the dorm for free utilities!
Post
Topic
Board Altcoin Discussion
Topic OP
How does one create an altcoin?
by
HDutchie
on 13/01/2015, 05:17:27 UTC
Hello all. I'm looking to make a very simple SHA coin called TestCoin (for miner testing, etc.). How exactly would I go about this? I would prefer NOT to use a service like CoinCreator if possible.

Thanks,
HD
Post
Topic
Board Mining support
Re: Overclocking an AntMiner C1...
by
HDutchie
on 12/01/2015, 08:57:16 UTC
Just like the others you go to miner configuration with in it advanced settings.  Once you go there the freq and voltage can be changed.

Advanced warning overclocking voids warranty.
Problem is I can't find any values to overclock to...
IE what is voltage for 275?
Checked chip spec sheets for values, almost blew up miner.
Post
Topic
Board Mining support
Topic OP
Overclocking an AntMiner C1...
by
HDutchie
on 10/01/2015, 04:14:14 UTC
Does anyone know how?  Grin
Post
Topic
Board Hardware
Re: [Guide] Dogie's Comprehensive Bitmain Antminer C1 Setup [HD]
by
HDutchie
on 27/12/2014, 20:31:39 UTC
What about wireless? It's really cumbersome to drill holes for a neat looking ethernet cable...
Post
Topic
Board Hardware
Re: [Guide] Dogie's Comprehensive Bitmain Antminer C1 Setup [HD]
by
HDutchie
on 27/12/2014, 19:24:49 UTC
Is the cooling kit necessary?

100%, yes. If you want something similar but without watercooling, pick up an S3 or S5.

Great work on the guide! I gave up on the gibberish instructions with the kit. I am noticing a massive amount of "discarded" shares...

Is this normal?

Discards are entirely normal and shouldn't really be displayed at all as they're meaningless in regards to mining performance. Think of it as someone counting how many times you close your front door on the way to work, in a work performance report.

Alright, great. Anything on overclocking yet? I did see a field for that but have no idea what voltage to select. Also, where' s the SSH?

Also, any guides about the S5?
Post
Topic
Board Hardware
Re: [Guide] Dogie's Comprehensive Bitmain Antminer C1 Setup [HD]
by
HDutchie
on 27/12/2014, 03:51:13 UTC
Great work on the guide! I gave up on the gibberish instructions with the kit. I am noticing a massive amount of "discarded" shares...

http://i.imgur.com/BZ35Ne0.png

Is this normal?
Post
Topic
Board Hardware
Re: [Guide] Dogie's Comprehensive Bitmain Antminer C1 Setup [HD]
by
HDutchie
on 26/12/2014, 22:45:40 UTC
Is the cooling kit necessary?
Post
Topic
Board Hardware
Re: Setting Up Antminer S1 with Wi-Fi Antenna
by
HDutchie
on 23/10/2014, 19:16:20 UTC
Sorry to bump a dead thread, but what wireless antenna did you use and where did you get it? I can’t find one anywhere!