Search content
Sort by
Showing 20 of 60 results by Josue
Vendo 3 unidades de Bitburner Fury. Dan 150 G en total. Una unidad tiene el micro-usb roto pero como trabajan en cascada no hay problema con él.
Precio: 200 (Acepto Bitcoins)
Forma de pago y envío a convenir con el comprador.
Saludos¡¡¡
Precio: 200 (Acepto Bitcoins)
Forma de pago y envío a convenir con el comprador.
Saludos¡¡¡
Ueeee, llegaste tardee, el 17 le acabo de pillar¡¡¡ jejejeje.
Por cierto, y sin desviar la atencion de esta genial iniciativa: he usado la tercera opcion porque no tengo ni idea de como se añade una nota publica a un envio ¿?¿?¿? alguien explica?
Gracias y Saludos¡¡¡¡
Por cierto, y sin desviar la atencion de esta genial iniciativa: he usado la tercera opcion porque no tengo ni idea de como se añade una nota publica a un envio ¿?¿?¿? alguien explica?
Gracias y Saludos¡¡¡¡
12x Erupters at 16MHz and 1.35k. And just in time to get 5.3GH in the little runup on shush pool. Feels like last month!
Yum, an extra gigahash for about $20.
Yum, an extra gigahash for about $20.
Where do you buy this heat skins?
Thanks¡¡
I use a 1.5 r and 16mhz. Alone work fine (a lot of heat...) But if i connect the other four, the hacked one go down. I use 3A power supply. Im prove tonight a pc power supply and comment.
Error¡¡¡ I´m using a 15K resistor¡¡¡¡ So heat, lot of errors, slow speed¡¡¡
Change now for a 1.5K and see errors... seven in ten minutes at 440mhs.... and more heat.
It´s possible that the errors and heat is for the 1.5K resistor? Better 1.2K?
Thanks¡¡¡
With 16mhz is necesary change the heat skin? Or only with air can work?
Thanks¡
Thanks¡
I currently have 4 sticks running at 16Mhz at full hash of 447Mh/s with no changes to the heatsink. (I didn't even remove it to do the soldering.)
current temps are around 37deg C with ambient around 16degC. my 13.5Mh/s units are around 32degC. I have a 23cm desk fan blowing air across my miners.
it seems to work well.
so no you don't have to modify the heatsink.
Lot of thanks for your reply. You use air solder to do that without remove the heatsink???
What are those top cards?
Nice rig.
Nice rig.
BitFury 400gh/s unit
WHere do you buy this?
?Re: [Group Buy] Avalon ASIC Chips (SebastianJu) Batch 6 ordered (Closed)
I recibed my refound, lot of thanks for your work Sebastian. One question: Why I recibed 16.34 if i pay 17.2 B? What is the calculed metod? (this is not a reproach, just a question 
)
Thanks Again¡¡
)Thanks Again¡¡
The payout is 95% because of the great work he did must be honored somehow.
Ok, thanks for your reply... but, I ask again: 780 Bitcoins (avalon price for 10,000 chips) /10,000 = 0.078 B/chip. I paid 0.086 B/chip. I think that all the risk of the operation was in this difference. In 10,000 chips he won 80 B.... and again, this is not a reproach, just a question
I really appreciate the Sebastian work¡¡¡Re: [Group Buy] Avalon ASIC Chips (SebastianJu) Batch 6 ordered (Closed)
I recibed my refound, lot of thanks for your work Sebastian. One question: Why I recibed 16.34 if i pay 17.2 B? What is the calculed metod? (this is not a reproach, just a question )
Thanks Again¡¡
)Thanks Again¡¡
FIXED tutorial
http://snk.to/f-c7xmwnj1
note thanks for the feedback I attempted to correct the links if they don't work let me know again. But I put links that can now be copied and pasted into a web browser and they are working for me on 2 computers so hopefully they are now good, modified temps for rework and also added bluestreaks orientation for the OSC
http://snk.to/f-c7xmwnj1
note thanks for the feedback I attempted to correct the links if they don't work let me know again. But I put links that can now be copied and pasted into a web browser and they are working for me on 2 computers so hopefully they are now good, modified temps for rework and also added bluestreaks orientation for the OSC
Lot of thanks¡¡¡¡¡ But... in another post i read that use heatskin inside chip drecreasse his capacities ¿its really?
Thanks again¡¡
Yes power is going to be a problem (well one problem) , I found a replacement regulator for the one on the board , going to need a new inductor also. The new regulator has a ground pad so that works out have to take off the silk screen but it *should* be a drop in replacement, the inductor not sure yet. I have been running it at 20 MHz for 5 hours now and the stats are
A:641 R:1+0(.16%) HW:39/1.6%
The bad thing that is at 1.525 V and 4.004A so it would be max on the new regulator, most all the other regulator chips either have the pad as output or different pin out. If the chart holds up were going to be at 1.75V and 5.5A for a 24 MHz run, if it will. I am going to put a heat sink on top of the chip tomorrow, running about 137 F now on top.
A:641 R:1+0(.16%) HW:39/1.6%
The bad thing that is at 1.525 V and 4.004A so it would be max on the new regulator, most all the other regulator chips either have the pad as output or different pin out. If the chart holds up were going to be at 1.75V and 5.5A for a 24 MHz run, if it will. I am going to put a heat sink on top of the chip tomorrow, running about 137 F now on top.
Thankss¡¡¡¡¡¡¡¡ Waiting for your numbers.
Re: [Work in progess] Burnins Avalon Chip to mining board service
Is there an ongoing doc available (or link) on the overclocking settings for when we get our Burin rigs?
(Something specific to these rigs).
edit - Also, has anyone played with this setting? "--avalon-auto Adjust avalon overclock frequency dynamically for best hashrate"
I haven't read the whole thread but curious how this compares to manual...
Thx,
IAS
(Something specific to these rigs).
edit - Also, has anyone played with this setting? "--avalon-auto Adjust avalon overclock frequency dynamically for best hashrate"
I haven't read the whole thread but curious how this compares to manual...
Thx,
IAS
+1
Thanks¡
i am using 1.2k resistors with no problem and getting 447Mhs
What crystal and heat skin?? Any photo?
Thanks¡