Anyone knows why "--plimit=" command is not working with Z-enemy 1.08?
Or if it works at all?

newbie question:

How to use "--revA" option?

I tried using a .bat file, would this work?

OhGodAnETHlargementPill-r2.exe --revA 2,3,5

I have a problem with one of my rigs running claymore v11.6 -

- EthDcrMiner64.exe stopped working. -

The big issue is actually the stupid windows error window (the one that pops up) that "locks" my miner and it is unable to restart, or even restart my rig.

Is there any way to keep the cmd window with claymore active or to automatically close the "Error" popup window?

Much appreciated.

Sorry to dig up this old thread, but I tried and my regedit shows all them values at "2" so... can't change that (1 of six RX 580) card from graphics to compute... still.
Anyone else found a workaround for this?

YES - as in: you are right! had to restart it couple of times to get the settings. using claymore 10.4 atm, no reason to go for 10.5, at least from patch notes...
THX MAN!

Thx man, "great" help.

I have troubles with my 6x rx 580 rig:
While the settings are ok and I did successfully flash the bios, seems that I still have to apply voltages using wattman.

Any idea why I am unable to set them from my start.bat?


timeout /t 15
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal mywallet.Rig1 -epsw x -r 1

-cclock 1200,1200,1200,1200,1200,1200
-mclock 2200,2200,2200,2200,2200,2200
-cvddc 900,900,900,900,900,900
-mvddc 900,900,900,900,900,900

Any help is much appreciated, thx.

Ok thx. I am not gonna mine on my own p2pool so I'll just wait for the first payment.

Any calculator coming soon?

Ok I could really use some help with the config file for monocle wallet.
Do I need one?
If yes could someone be so kind to post a model?

Sorry for newb question:

How to use addnode?  

Hello guys.
So I am new at this cryptocurrency stuff and I tried to make my first rig.
I got 1 x 7970 ghx ed from sapphire from my old comp will be considered 280x from now on
        2 x 280x vapor x sapphire
got   2 x 290 gigabyte windforce couple weeks ago.

My mainboard  Gigabyte Z69AP-D3 has 5 slots: 1pci-1x, 1pci-16x, 1pci-1x, 1pci-1x and 1pci-4x.

http://www.gigabyte.us/products/product-page.aspx?pid=4015#ov

I am using an ivy bridge processor, I updated bios to before UEFI version.

I got myself 5 powered usb risers and here comes trouble:

only 4 of them work, got the 5th one tested @ service and I was told defective pcb.

But I say hey I can still put one card in the pci-4x so let's try that.

Only worked with 5 cards once (used a short in the last pci-1x slot) but after system locked in windows when I started miner with wrong
 settings (mixed cards, different order resulted in crashed miner with locked system) it did not work again. After reboot it would not work
again. I got the card out of the pci-4x slot, tried with only 4 cards. Works on every slot, every combination.

The mainboard configuration only allows for 1 video card to be inserted in the pci-4x slot when using risers for the others.

Atm I got 3x280x and 1x290 working ok.

but if I put board nr. 5 in pci-4x slot it is not detected by windows.

Should I try making a better wire to short it?

After reading/trying all sort of combos for 2 days I have to turn to asking around for some pointers...

Thank you for reading 

http://s28.postimg.org/mei9yoqot/bitcrush.jpg

WU varies between 650 and 750. No HW or rejects. Pool difficulty varries.

I managed to get my 2x R9 280x vapor x working @ 375kh/s each

here are my settings:

setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100

cgminer --scrypt -o stratum+tcp://stratum12.dogehouse.org:9091 -u x -p x -I 13 -g 2 -w 256 --lookup-gap 2 --thread-concurrency 8192 --gpu-engine 1076,1072 --gpu-memclock 1500,1500 ---temp-cutoff 85 --temp-overheat 80 --temp-target 75 --auto-fan


,
"intensity" : "13",
"worksize" : "256",
"lookup-gap" : "2",
"auto-fan" : true,
"gpu-fan" : "70-80,70-80",
"gpu-engine" : "1076,1072",
"gpu-memclock" : "1500,1500",
"gpu-powertune" : "10,10",
"thread-concurrency" : "8192",
"expiry" : "30",
"gpu-threads" : "2",
"scan-time" : "5"

Temperatures are 59 for first and 70 degrees for the second one.

Any recomandations for some risers? I can't seem to make up my mind on what I see online.