Search content
Sort by
Showing 20 of 32 results by Rockou
Como estan? Hace meses logre vender mis btc en Coinsbank y logre hacer la transferencia bancaria desde mi Usd wallet a mi cuenta en el mercantilbank en Usa. Sin embargo trate de hacer lo mismo ahorita y no están haciendo transferencias bancarias, que me recomiendan? Necesito unos dolares y quiero vender mis btc.
The first thing I would do is the basic troubleshooting if you have not. Swap the ports on the controller, try the bad boards cable into a port where one of the known working boards was. Confirm it still doesnt hash that way. If that is the case your only option really is bitmainwarranty. I know they do a lot of russian repairs and whatnot so I dont think they would have a problem working with an international customer.
Thank you so much man, I'll do that!... Is it often these boards have the same problem? Or It was because of the temperatures or high voltage or may be bad luck?
What help are you looking to get? A bad board is a bad board. If you have gone though the basic troubleshooting and its still not working the only option you have is a paid repair service.
I wanted to know if it was a bad board... So what do you suggest me man? I do not know where to send it... Somebody told me about bitmainwarranty but I'm trying to contact them and I do not receive any anwer... Is there any website where I could buy that board or a place where I could send it?
Thank you so much for your answer Fanatic26
Hello guys, I know this is not the best place to post this problem, but as I know you are the best and smartest guys over here please help me with this if you are able:
I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:
I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000
I've seen in the forum some problems about that and says it is a board problem.
My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys Sad I'm really worry about that Sad
Here is a picture of what I'm telling you:
https://ibb.co/b2imM5
I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:
I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000
I've seen in the forum some problems about that and says it is a board problem.
My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys Sad I'm really worry about that Sad
Here is a picture of what I'm telling you:
https://ibb.co/b2imM5
You need to post a screenshot of the full page for seeing all chips. but it looks like you have a problem with 1 hashing board; should send to bitmain for repair or purchase a hashing board and replace it at your own risk.
I also highly recommend to have a 2nd and 3rd mining address for backup (not just the 1st one).
Hello Apprentice I tried to put the screenshot but I do not know why it does not appear
https://ibb.co/b2imM5
I clicked on "Insert Image" then I put the address, lets see if it works...
https://ibb.co/b2imM5
The board I must buy is the one is in the bitmain address?
Do you guys have any guid how to do that?
Do you think It could work? I did it today for a while but it just worked for a while then It turned off... I can't send this kind of products out of my country due to some regulations we do have here... thats why I'm worry about this. Do you know any solution about that? Where can I buy those hash board and Do it by myself?
Hello guys, I know this is not the best place to post this problem, but as I know you are the best and smartest guys over here please help me with this if you are able:
I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:
I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000
I've seen in the forum some problems about that and says it is a board problem.
My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys Sad I'm really worry about that Sad
Here is a picture of what I'm telling you:
https://ibb.co/b2imM5
I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:
I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000
I've seen in the forum some problems about that and says it is a board problem.
My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys Sad I'm really worry about that Sad
Here is a picture of what I'm telling you:
https://ibb.co/b2imM5
You need to post a screenshot of the full page for seeing all chips. but it looks like you have a problem with 1 hashing board; should send to bitmain for repair or purchase a hashing board and replace it at your own risk.
I also highly recommend to have a 2nd and 3rd mining address for backup (not just the 1st one).
Hello Apprentice I tried to put the screenshot but I do not know why it does not appear
https://ibb.co/b2imM5
I clicked on "Insert Image" then I put the address, lets see if it works...
https://ibb.co/b2imM5
The board I must buy is the one is in the bitmain address?
Do you guys have any guid how to do that?
So far I've had two miners like that, too.
First thing I'd try is take off the cable of the board and reattach.
I've also switched out boards with each other and reattached them. So far I've had luck and then they started working.
First thing I'd try is take off the cable of the board and reattach.
I've also switched out boards with each other and reattached them. So far I've had luck and then they started working.
Hello @Scaary
I have the same problem too but the different is mine shows temperature. Please let me know, how did you do to repair that? Do you have a guide? I'm not able to send the miner to bitmain so I have to do it by myself. Help me please
Here is a picture I took
https://ibb.co/b2imM5
Hello guys, I know this is not the best place to post this problem, but as I know you are the best and smartest guys over here please help me with this if you are able:
I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:
I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000
I've seen in the forum some problems about that and says it is a board problem.
My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please guys, help me. I'm really sad about that
Here is a picture of what I'm telling you:
https://image.ibb.co/gRnD15/AYUDA_1.jpg
I've been mining in kano since six months I think and from yesterday I realized my TH/S dropped a lot and I went to check my miners and I found this:
I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000
I've seen in the forum some problems about that and says it is a board problem.
My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please guys, help me. I'm really sad about that
Here is a picture of what I'm telling you:
https://image.ibb.co/gRnD15/AYUDA_1.jpg
Hello Guys, first of all I realle need your help in this.
I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000
I've seen in the forum some problems about that and says it is a board problem.
My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys I'm really worry about that
Here is a picture of what I'm telling you:
https://image.ibb.co/gRnD15/AYUDA_1.jpg
I have an Antminer S9 and it got in the chain #8 GH/S(RT) = 0.00000
I've seen in the forum some problems about that and says it is a board problem.
My antminer is out of warranty, and I am not able to send back to bitmain to get a repair ticket because it is almost impossible to send it from my country. So please help me guys
I'm really worry about that Here is a picture of what I'm telling you:
https://image.ibb.co/gRnD15/AYUDA_1.jpg
Re: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner
Hello guys, I'm new in Litecoin... I've purchased 2 Antminer L3+ 504mhz and I already got them. I'd like to know in which pool I must put them... Hopefully you can help me, thank you.
Nicehash or Prohash. Use a switching pool. you will maximize your bottom line.Is https://prohashing.com/ the Prohash pool website?
Re: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner
Hello guys, I'm new in Litecoin... I've purchased 2 Antminer L3+ 504mhz and I already got them. I'd like to know in which pool I must put them... Hopefully you can help me, thank you.
Nicehash or Prohash. Use a switching pool. you will maximize your bottom line.Thank you man but what you mean when you say use a switching pool?
A switching pool redirects your hashrate to mine the most profitable coin possible at any given point in time.
But is it possible with an Antminer L3+
What about if I just want to mine litecoin?
Re: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner
Hello guys, I'm new in Litecoin... I've purchased 2 Antminer L3+ 504mhz and I already got them. I'd like to know in which pool I must put them... Hopefully you can help me, thank you.
Nicehash or Prohash. Use a switching pool. you will maximize your bottom line.Thank you man but what you mean when you say use a switching pool?
Buenos días.
Pues si, yo tengo varios L3+ ya en marcha y también he comprado varios D3 y en el primer caso recupero la inversión en poco más de un mes pero si pienso el valor actual de los BTC que pague por estos equipos necesito al menos 3 meses para recuperar la inversión en BTC a partir de ahí todo beneficio.
Respecto a los D3 imagino que pasará lo mismo o incluso a lo mejor se alarga un poco más el plazo para amortizar la inversión tanto en euros como en BTC al haber más equipos en circulación tanto de Bitmain como de otros fabricantes.
Pues si, yo tengo varios L3+ ya en marcha y también he comprado varios D3 y en el primer caso recupero la inversión en poco más de un mes pero si pienso el valor actual de los BTC que pague por estos equipos necesito al menos 3 meses para recuperar la inversión en BTC a partir de ahí todo beneficio.
Respecto a los D3 imagino que pasará lo mismo o incluso a lo mejor se alarga un poco más el plazo para amortizar la inversión tanto en euros como en BTC al haber más equipos en circulación tanto de Bitmain como de otros fabricantes.
@Zerobyte1969 en que pool estas minando con los L3+?
Re: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner
Hello guys, I'm new in Litecoin... I've purchased 2 Antminer L3+ 504mhz and I already got them. I'd like to know in which pool I must put them... Hopefully you can help me, thank you.
Rockou
Yes that was the email address you got in every email from the pool
No don't post email addresses on public forums
Yes that was the email address you got in every email from the pool
No don't post email addresses on public forums
I'm so sorry Mr Kano, but I'm new in this so, it will not happen again... And thank you so much
Hello Guys! Is anyone having problems to access to your account? Since today, I'm having this problem because it says login failed and I'm worry about to be hacked so please if anyone can help me I'd appreciate that.
I was able to login just fine.
Done!!! I just loged in thank you!
Hello Guys! Is anyone having problems to access to your account? Since today, I'm having this problem because it says login failed and I'm worry about to be hacked so please if anyone can help me I'd appreciate that.
Can anyone explain to me what I should do with the UAHF and UASF?
Hi guys I know that this post is repeated everywhere but, I do not speak english very well and I need to be explained about this and What I should do to be safe!!! I downloaded a wallet software to deposit my btc but also I do not understand how it works... I use coinsbank as my personal wallet, what is your recommendation? Thank you!!