Got a windows 7 and 8 key. The Windows 7 key worked and I haven't tried the windows 8 key yet.

I got my 8 board but it hashes around 16 GH/s and keeps saying "Timing out unresponsive ASIC 6 & 7"

http://i.imgur.com/kdYPj9T.png

This morning I received fedex shipment notification from Cryptx, and that my order should arrive Wednesday morning. Still no info on the software (custom CG miner build I believe).

The N450 is a single core CPU with hyperthreading.

I bought the last 4 of those Xbox 360 slims. Only two of them had 4 GB memory units in them but all four consoles function properly asside from the two with no storage at all.

I received my card today, it works perfectly fine. It was also packaged very well.

If they are still available, I live in the US and would also like one.

SUP; burnin; Starcraftman

Will you be replying to orders to confirm them?

I've got two Sempron 140's. One has a cooler and one is just the CPU.

I just want to say goodluck with this and lets hope for the best!

Bump

Bump.

I did.  I looked at an Intel datasheet for the 1155 pinout, and it looks like the broken pin is for one of the DMI_RX sets, which is supposedly for communication with the PCH. The link to to PCH has four lanes so hopefully it just disabled one.

I tested the motherboard with an i5 2500k. Everything I tested seemed to work, which includes:
-Integrated CPU graphics and PCIe Graphics cards
-All memory slots
-USB ports

I will be open to offers over $60 $50, since technically the board is partially defective but I did not notice any problems during my testing.

I'm looking for single 2GB sticks of anything above 667 Mhz. I need the single 2 GB SODIMM for my netbook and the desktop stick would be for a micro ITX board since both only have 1 ram slot.

Here is a list of the hardware I have for sale.

-2 Sapphire 5830 Extreme with original box and parts. Ran for 7 months. $80 each+ Shipping

-The second Sapphire 5830 Extreme crashes terribly in games, but continues to work for mining. I have also drilled a hole in the top of the fan to oil it due to the noise it was making. I also replaced the thermal paste. $60 + Shipping Decided to keep "this card.

  -Both 5830's come with two molex-> PCIe power adapters, DVI->VGA adapter. If needed I could ship the 5830's in smaller boxes to lower shipping costs.

-AMD Sempron 140 with original box and heatsink. $25

-AMD Athlon II x2 250 CPU only. $40

-Linksys E1200 Wireless N Router New in box (box slightly damaged). $35

-4x PCIe x1 extenders with the backs cut out to fit longer cards. $4 each

-Adaptec 29160N PCI SCSI controller card + 2 Compaq 18GB 10k RPM drives. No idea how much these are worth, probably not much due to how old they are.


I would prefer BTC but I would also consider trades. Right now I am looking for single sticks of 2GB DDR2 desktop and SODIMM's, as well as 2.5" SATA hard drives + molex -> SATA power adapter.


  

Yea I looked around and that seemed to be the best way to fix bent pins. That would have worked perfectly if that one pin wasn't bent fully in half such that unbending it caused the tip to snap off.

Ok, I went ahead and bent the pins back. It looks fairly good except for one pin that appears to be missing the tip. I will try to borrow a 1155 CPU this week and test the board.

Here is what it looks like now: http://i.imgur.com/k3eLG.jpg

The red circle shows where the partially decapitated pin is.

Edit: I looked at an Intel datasheet for the 1155 pinout, and it looks like the broken pin is for one of the DMI_RX sets. Hopefully this only breaks at most one of the links to the PCH. I will update this thread when I fully test everything.