Search content
Sort by
Showing 4 of 4 results by Stealthbomber76
Re: Braiins OS: open-source mining firmware [S9, T1]. New release includes AsicBoost
Not too sure if this is the correct place to post but i'm using braiins OS and Antminer S9 with a xilinx board and have a problem that after x amount of time the miner either
a) stops hashing completely when fans are turned to automatic - returns to normal after rebooting
b) hash drops to below normal ( 5k - 8k ) while normal is 13k/h - returns to normal after rebooting
Both times after reboot it works for about a day and then same thing occurs.
System log below. This happened with Bitmain fw as well but was unable to change fan speeds there so it stoped hashing completely. Tried a different controller board and same thing is happening.
What can be wrong ? Fans ? Hash board sensors ? If hash board sensors then disabling the sensors withing braiins OS is the only solution ? Is it possible to edit cgminer.conf without SSH like from web ui ?
Thanks for any help !
[...]
a) stops hashing completely when fans are turned to automatic - returns to normal after rebooting
b) hash drops to below normal ( 5k - 8k ) while normal is 13k/h - returns to normal after rebooting
Both times after reboot it works for about a day and then same thing occurs.
System log below. This happened with Bitmain fw as well but was unable to change fan speeds there so it stoped hashing completely. Tried a different controller board and same thing is happening.
What can be wrong ? Fans ? Hash board sensors ? If hash board sensors then disabling the sensors withing braiins OS is the only solution ? Is it possible to edit cgminer.conf without SSH like from web ui ?
Thanks for any help !
[...]
Hi. Did you get any help on this daemon err? I got about the same but different codes.
Hello there..
Been testing this fw some and i do love it! But i seem to get error as i have see one had also but i cant found the answer to it what to do...
Code:
daemon.err cgminer[26603]
daemon.err cgminer[29394]
daemon.err cgminer[29394]
Right now im using 2 Antminer s9 and both gives same error but code is different. I try to look online but not found any help
THX
Hey
bought some days ago on a page called 'mining-tech.de' a S9 miner.
The miner has 14 TH/s originally but there are some variations of about 5% possible and my miner seems to be such a case.
So my question : what can I do to increase my yield?
Thx in advance
bought some days ago on a page called 'mining-tech.de' a S9 miner.
The miner has 14 TH/s originally but there are some variations of about 5% possible and my miner seems to be such a case.
So my question : what can I do to increase my yield?
Thx in advance
Are this company Legit? I been looking for S9 or R4
Re: BITMAIN Antminer S3 support and OverClocking thread
Hi..Newbie in da house..
I do wunder about Oc alot cause in my S3 i did oc and...well nothing happend :O The Gh/s is pretty much the same.. Even when did all by as you in here has wrote about the freq and so 250 as it is at the top.. Nothing.. One S3 showing Freq of 231.25 :O BUT with no Hw error.. running (30min) Why no speeding ticket's?? Has any else see this?
I do wunder about Oc alot cause in my S3 i did oc and...well nothing happend :O The Gh/s is pretty much the same.. Even when did all by as you in here has wrote about the freq and so 250 as it is at the top.. Nothing.. One S3 showing Freq of 231.25 :O BUT with no Hw error.. running (30min) Why no speeding ticket's?? Has any else see this?
Hello everyone!
Could some help a man around abit? I got a S3(+) and im using the stock settings and also try with Oc little bit and nothing seem to work around.. My psu unit's are Dell12v 700w each.. So I connected 3 cap's on to the connection's to smoother the voltage out also thicker wires. But one of the S3 show's weird numbers on one of the fan's. Fan1 normal rpm but the fan2 is from 4200rpm to 6000rpm sometimes.. The temp mostly never go up more then around 40...isch
I try with flash new firmware and nothing seem to work.. I also disconnected the fan to see if there was some wrong with the fan but the S3 show's anyway high rpm :O wtf...
Could some help a man around abit? I got a S3(+) and im using the stock settings and also try with Oc little bit and nothing seem to work around.. My psu unit's are Dell12v 700w each.. So I connected 3 cap's on to the connection's to smoother the voltage out also thicker wires. But one of the S3 show's weird numbers on one of the fan's. Fan1 normal rpm but the fan2 is from 4200rpm to 6000rpm sometimes.. The temp mostly never go up more then around 40...isch
I try with flash new firmware and nothing seem to work.. I also disconnected the fan to see if there was some wrong with the fan but the S3 show's anyway high rpm :O wtf...