Search content
Sort by
Showing 20 of 30 results by Vcxz
Re: SRBMiner Cryptonight AMD GPU Miner V1.9.1 - native algo switching
V1.9.1
- Added support for Navi10 (gfx1010)
- Arto, conceal, normal, normalv7, marketcash, b2n, fast, hycon, hospital algos have lower power consumption on Vegas with auto settings
- Hopefully fixed bug with invalid job id / same job id
- If more than 5 'invalid share' messages received from pool within same connection, auto miner restart
- Fixed cn-gpu hashrate (it was lower from v.1.8.8 -> my mistake)
- CN/R program precompilation process is now only logged, not displayed on screen
+ Added support for gfx1010 card. Well at least i hope, because i don't own a rx 5700 card, so i couldn't test
It would be good if someone could test it and report back.
+ On Vega, intensity 0 (auto setting) now uses a little less power on next algorithms :
Arto, conceal, normal, normalv7, marketcash, b2n, fast, hycon, hospital
+ I tried to fix the 'invalid job', 'invalid share' issue, unfortunately i couldn't reproduce it neither earlier neither now, that's why i say i tried ..
Anyways if the problem still persists, i also added a 'protection' against this, if within the same pool connection more than 5 invalid share messages received from the pool, miner will auto restart.
+ I accidentally messed up CN/GPU hashrate from version 1.8.8, now it is fixed and hashing again at full speed
- Added support for Navi10 (gfx1010)
- Arto, conceal, normal, normalv7, marketcash, b2n, fast, hycon, hospital algos have lower power consumption on Vegas with auto settings
- Hopefully fixed bug with invalid job id / same job id
- If more than 5 'invalid share' messages received from pool within same connection, auto miner restart
- Fixed cn-gpu hashrate (it was lower from v.1.8.8 -> my mistake)
- CN/R program precompilation process is now only logged, not displayed on screen
+ Added support for gfx1010 card. Well at least i hope, because i don't own a rx 5700 card, so i couldn't test
It would be good if someone could test it and report back.
+ On Vega, intensity 0 (auto setting) now uses a little less power on next algorithms :
Arto, conceal, normal, normalv7, marketcash, b2n, fast, hycon, hospital
+ I tried to fix the 'invalid job', 'invalid share' issue, unfortunately i couldn't reproduce it neither earlier neither now, that's why i say i tried ..
Anyways if the problem still persists, i also added a 'protection' against this, if within the same pool connection more than 5 invalid share messages received from the pool, miner will auto restart.
+ I accidentally messed up CN/GPU hashrate from version 1.8.8, now it is fixed and hashing again at full speed
tested on 5700xt
Algo: normalv4
1 min avg: 231 H/s
5 min avg: 206 H/s
Max Speed: 866 H/s
Re: Where to find the latest Windows drivers for the NVIDIA P102-100 GPU?
Does anyone know where to find the latest Windows drivers for the NVIDIA P102-100 GPU?
The latest version I have found so far is 384.x from the Manli website.
The NVIDIA 391.x drivers for GeForce 10 series do not detect the P102-100 GPU unfortunately.
The latest version I have found so far is 384.x from the Manli website.
The NVIDIA 391.x drivers for GeForce 10 series do not detect the P102-100 GPU unfortunately.
Drivers are from the manufacturer of the cards, not nvidia directly. So Manli will need to make an updated driver, which most likely will never happen and you will not be able to use cuda 9.1. Just like with p104/p106, drivers came from the company and they never released updated versions as nvidia updated.
This is big disadvantage of mining card that many people doesn't know.
is it possible to mine on my computer whose operating system is window?
Yes, by using your CPU to mine
https://downloads.electroneum.com/
does anyone mine the electroneum on its android via the app?
Its not actually mining, its like running an app and you get an ETN reward
Yes, It for marketing purpose.
But I think it a good one.
I have a Ryzen 1600x no (further) overclock running mostly @ 3700Mhz
I'd like to share my hashrates in those new algos:
1- Mining Sumokoin (Cryptonight Heavy)
150H/s, 53C, 51W
2- Mining Graft (Cryptonight v7)
480H/s, 60C, 63W
Obs: I'm using the same cpu thread config for both. Am I supposed to expect that much lower a hashrate for CN heavy mining?
I'd like to share my hashrates in those new algos:
1- Mining Sumokoin (Cryptonight Heavy)
150H/s, 53C, 51W
2- Mining Graft (Cryptonight v7)
480H/s, 60C, 63W
Obs: I'm using the same cpu thread config for both. Am I supposed to expect that much lower a hashrate for CN heavy mining?
I think it too much drop
Good day,
The launch is coming along nicely so it is time for an update on things
Please feel free to check out the latest Helium update that focuses on the pending launch, governance, the leadership team and some house cleaning items from the previous year:
https://medium.com/@jasonmcassidy/helium-pre-launch-update-853a6d161382
The launch is coming along nicely so it is time for an update on things
Please feel free to check out the latest Helium update that focuses on the pending launch, governance, the leadership team and some house cleaning items from the previous year:
https://medium.com/@jasonmcassidy/helium-pre-launch-update-853a6d161382
Nice info on this update. Cheers
Q: If I wanted to donate some pizza money to the broke ass college student that typed this up, how would I do so?
A: You ask the best questions! I doubt I'll get anything before more well known people/websites copy everything I just said (with no credit, obviously), but here are some addresses just in case.
XMR: 42e8AWjcirkBDzCNnSjPxeGJeht71kFfWcoxxCWsxe8HZqP29NruDsxcvVSjbKw17AUDepopK7ZYCUn mRvcGS9kBT5XWhMQ
ETH: 0x74Ed2CA095Dd3aE98D88d5ca1dDb77E752152938
Want to send 0.5XMR but it seem wrong address
https://i.imgur.com/JseQ1yC.png
For 1billion USD Marketcap
Total HLM supply 20m -> $50 per coin
Now after SPR snapshot have 9m -> $111 per coin
For 1billion USD Marketcap
Total HLM supply 20m -> $50 per coin
Now after SPR snapshot have 9m -> $111 per coin
Where you got this informations
Because, at this time This helium not launch yet
It just dev expectation from https://www.heliumlabs.org/docs/frequently-asked-questions
https://i.imgur.com/JseQ1yC.png
For 1billion USD Marketcap
Total HLM supply 20m -> $50 per coin
Now after SPR snapshot have 9m -> $111 per coin
For 1billion USD Marketcap
Total HLM supply 20m -> $50 per coin
Now after SPR snapshot have 9m -> $111 per coin
Hi, What The Price For This Coin Please?!!
Thanks
Thanks
I think it has potential to $10-$15
Re: Krnlx Nvidia xevan miner - 3.3+ mh on 1070, ~6mh on 80ti FREE, OPENSOURCE
It was more profitable than ZEC for a while then the Windows version released and pool hashrate went up 5x+ = GG profit
You're absolutely right, even last night it was more profitable than this morning. Amazing...Diff have come up 2x compare with last week.
CROSS POST FROM SLACK - SNAPSHOT DATE & TIME & EXCHANGE INFORMATION:
KARMASHARK:
Good evening everyone (in Canada it is dinner time ). You all have been extremely patient while we have put together the final pieces of the snapshot and launch. We will have an exchange partner with us and that exchange is Cryptopia. Between the professionalism shown in negotiations with us and their growing positive reputation as an exchange, we felt this was an ideal pivot to make for the network. The reason why we are not using Bittrex is due to the changing regulatory landscape and the internal decisions that stemmed from that (more background checks on coins to be listed, legal requirements and potential lawyers, increased site security and KYC and AML applications). All of these changes put listing a new coin / administering an air drop to a much lower priority from Bittrex's perspective.
We are still on very good terms with Bittrex due to the hard work we put in leading up to this as we went through a thorough vetting process with them between @coins101 and myself. This work we put will hopefully get us in a position to be listed with Bittrex once Helium launches without hitch. We continue to progress conversations with Bittrex to advance this long term goal for Helium.
About the snapshot:
The snapshot will take place on October 10th, at 10AM NZ local time (Cryptopia is a NZ exchange). The block height is 1657200 and should fall within the listed time-frame. You will want to have your Spreadcoins (SPR) in your local Spreadcoin wallet or deposited at Cryptopia in the Spreadcoin wallet in your account. Cryptopia will be assisting with the air drop of Helium coins so if you are holding your SPR at Cryptopia you will be credited an equal amount of Helium coins once the air drop commences.
In summary, you will have to two options to prepare for the Oct 10th, 10AM NZ local time snapshot of the Spreadcoin blockchain (please note the TZ and adjust for your local TZ):
Holding your SPR at Cryptopia
Holding your SPR in your local SPR wallet
Details on the launch and specifics regarding Cryptopia and holding your SPR in your local wallet will be included in the next update. We are very close now to launching the Helium network so get ready to start your engines, the show is just about to begin.
KARMASHARK:
Good evening everyone (in Canada it is dinner time ). You all have been extremely patient while we have put together the final pieces of the snapshot and launch. We will have an exchange partner with us and that exchange is Cryptopia. Between the professionalism shown in negotiations with us and their growing positive reputation as an exchange, we felt this was an ideal pivot to make for the network. The reason why we are not using Bittrex is due to the changing regulatory landscape and the internal decisions that stemmed from that (more background checks on coins to be listed, legal requirements and potential lawyers, increased site security and KYC and AML applications). All of these changes put listing a new coin / administering an air drop to a much lower priority from Bittrex's perspective.
We are still on very good terms with Bittrex due to the hard work we put in leading up to this as we went through a thorough vetting process with them between @coins101 and myself. This work we put will hopefully get us in a position to be listed with Bittrex once Helium launches without hitch. We continue to progress conversations with Bittrex to advance this long term goal for Helium.
About the snapshot:
The snapshot will take place on October 10th, at 10AM NZ local time (Cryptopia is a NZ exchange). The block height is 1657200 and should fall within the listed time-frame. You will want to have your Spreadcoins (SPR) in your local Spreadcoin wallet or deposited at Cryptopia in the Spreadcoin wallet in your account. Cryptopia will be assisting with the air drop of Helium coins so if you are holding your SPR at Cryptopia you will be credited an equal amount of Helium coins once the air drop commences.
In summary, you will have to two options to prepare for the Oct 10th, 10AM NZ local time snapshot of the Spreadcoin blockchain (please note the TZ and adjust for your local TZ):
Holding your SPR at Cryptopia
Holding your SPR in your local SPR wallet
Details on the launch and specifics regarding Cryptopia and holding your SPR in your local wallet will be included in the next update. We are very close now to launching the Helium network so get ready to start your engines, the show is just about to begin.
BUMP
TL;DR --
The snapshot will take place on October 10th, at 10AM NZ local time (Cryptopia is a NZ exchange). The block height is 1657200
Does Cryptopia have official statement about this snapshot yet?
The "free" bitcoin sp-mod #2 wich is linked on the internet has alot of hits on the antivirus software.
Bitcore sp-mod #3 released today is clean, more stable and faster. (0.05btc donation)
https://i.imgur.com/OiipN0g.png
Bitcore sp-mod #3 released today is clean, more stable and faster. (0.05btc donation)
https://i.imgur.com/OiipN0g.png
What your OC setting? , with bitcore mod3 I can get maximum at 20MH/s only
Re: [ANN] Zcoin (XZC) - Implementing Zerocoin technology for financial privacy
Looks like found blocks with the hacked-together patched 0.13' version make 0.8' versions crash..
lol..
Ever heard of testnet, guys ?
Hint: Compare the CheckTransaction() functions have fun
lol..
Ever heard of testnet, guys ?
Hint: Compare the CheckTransaction() functions
have funDoes you pool still can mine this coin now ? or suggest we switch to other coin?
Thank you.
Alright actual question here. Might be worth another thread.
I restarted my rig. 4/6 Vega 64's are hashing at 1900+ still. 2 are not. No matter what I do with the HBCC slider for those cards, enable, disable, I cannot get the hash rate back. The card is otherwise clocked correctly, I get the same ETH hash rate as I would expect.
Any tips? Full clean re-install of AMD drivers? What I wouldn't do for some non-flashy software that would let you control these settings.
I restarted my rig. 4/6 Vega 64's are hashing at 1900+ still. 2 are not. No matter what I do with the HBCC slider for those cards, enable, disable, I cannot get the hash rate back. The card is otherwise clocked correctly, I get the same ETH hash rate as I would expect.
Any tips? Full clean re-install of AMD drivers? What I wouldn't do for some non-flashy software that would let you control these settings.
I confirm this problem. No matter what you do HBCC will enable only 4 first cards.
I think it drivers problem that does not support > 4 VGA yet
I have sendt a fixed version wich should find more blocks. Spreadminer 11 fixed final
Check your spam inboxes.
Check your spam inboxes.
what the problem that you found in previous version ?
Spreadminer 11 hasn't found any blocks over night on my test rig. I think something is broken..
I can confirm this no block found too.
A fresh release today
LBRY SP-MOD #6
-Slightly faster Kernel
-Bether speed on multicard rigs. (but with more cpu usage)
https://github.com/sp-hash/ccminer/releases/tag/LBRYSP6
1.7% fee (2 minutes for me, 118 minutes for you)
Untested on many models. Please test on the 1080 ti. What hashrates are you getting?
http://i66.tinypic.com/2is9xew.png
LBRY SP-MOD #6
-Slightly faster Kernel
-Bether speed on multicard rigs. (but with more cpu usage)
https://github.com/sp-hash/ccminer/releases/tag/LBRYSP6
1.7% fee (2 minutes for me, 118 minutes for you)
Untested on many models. Please test on the 1080 ti. What hashrates are you getting?
http://i66.tinypic.com/2is9xew.png
1080ti +180core + i3-4160
mod5 6cards cpu usage <1% 500-510
mod6 1card eat 30-40% cpu 490-500
mod6 6cards always 99%cpu 450-500
I have reproduced the problem now. If you mine with a high difficulty, you sometimes get errors. diff >= 512
on yiimp and zpool you can set a fixed diff in the password like this:
-p d=256
diff 1-256 is working fine.
on yiimp and zpool you can set a fixed diff in the password like this:
-p d=256
diff 1-256 is working fine.
OK first 2minutes does not have this problem and after set diff to 256 don't get error anymore on suprnova.cc
Thank you for your great works !
Cheers.
Works here.. Wich pool?
I have only tested on zpool and yiimp.
I have only tested on zpool and yiimp.
stratum+tcp://lbry.suprnova.cc:6256
just run at default clock and still get
[2017-02-25 09:34:11] GPU#1:Zotac GTX 1060 6GB, 190.21MH/s
[2017-02-25 09:34:13] [S/A/T]: 0/8/8, diff: 2.236, 1121.94MH/s yes!
[2017-02-25 09:34:17] GPU#3:result for 931e06ae does not validate on CPU 881b1141 > 00000000!
[2017-02-25 09:34:17] GPU#4:Zotac GTX 1060 6GB, 186.94MH/s
[2017-02-25 09:34:17] GPU#2:result for 79ffafdf does not validate on CPU e3b91cba > 00000000!
[2017-02-25 09:34:17] GPU#2:Zotac GTX 1060 6GB, 185.56MH/s
[2017-02-25 09:34:18] GPU#5:Zotac GTX 1060 6GB, 190.77MH/s