i got it.

the vega runs with 54 mh/s at 1100 on core and 1028 on mem with 850 mv on both.
tweak timings cl 20 ras 26 rcdrc 12 rcdwr 12 rc 38 rp 12 rrds 3 rrdl 5 rtp 6 faw 12 cwl 8 wtrs 4 wtrl 9 wr 13 ref 15600 rfc 239

is there better settings with the new trm v8.0?
i run it on windows, with 4 vega 56 power coler at 48 mh and 1 vega 56 phantom on 51mhs (morpheus color) mem temp set on 62
i've i try to overclock in hive i got many errors with powerplay table.
What do i wrong?
Is there an hashrate increase of switching to hive? when it runs?

hi,

i tried to flash my vega 64 nitro with the 56 bios on hiveos.
its going wrong and my card didnt get recognized,
can anyone help me to flash it back?
or with the correct 56 bios, and how to see the card?
thx

Hy,

i have vegas 56 hynix and are running it with blockchain driver, should i switched to the newest adrenalin?

thx.

thanks a lot!

one more question. i now run the vegas with ref 15600 rc 35 rcdrd 19 get 47 mh/s hashrate when auto tune set konfig on a1024.
but autotune set is not erverytime the same for example now 1 card is on eth config a736 and there are only 44mh's hashrate . Same cards with the same settings.

Can i set the eth config fix in the command line? or start autotune new?
and i need help with a batch file for amd tweak tool for startup i've the amdtweaktoolxl and i wrote

(folder of tweak toolxl...).exe --i 0,1,2,3,4,5 --rcdrd 19 --REF 15600 --rfc 164 --rc 35

it opens the tweak tool but didn't set any settings?

thx

hi,

can anyone help me to write a batch file?

i start with
folder of tweak tool....exe --i 0,1,2,3,4,5 --rcdrd 19 --REF 15600 --rfc 164

it runs the tool but nothing is changing

thx

I start with 17000 on ref an go down to 18 on rcdrd but it was  not stable. ref is now on 15600 and rcdrd 20 is stable for a few hours. hashrate is 46mh/s. i set the target temp on 55
But on restart the settings are lost.

hi, thx

now i got 46 mh/s with 1700 on ref and 20rcdrd and 4 rcdwr. there was no diference with rcdwr starts on 10.

does the settings from tweak tool reset after pc restart? watchdog is enabled with restart the system.
can i set a target temp for fan with command line ? or just settingfan speed?

hi,

i'm new on TRM. i have 4 vega red evil 56 card hynix ,with my settings from claymore i get a hashrate on 43mh/s
930mhz mem 1050 core on 900mv can't get the mem higher.
 i try modded the mem timings with the amdmemorytweakxl tool.

i always get the 43mh/s
i'm not sure i've im doing it right. try the changes from the ethgenreraltuning list in tweak tool. apply.

does TRM auto tuning reset this settings? or do i have to add anything in the command line?

thy

Hi,

Blake2s

ETH on ethermine.org ETH, Blake2s on Nicehash:
      PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal YourEthWalletAddress.WorkerName -proto 3 -dpool blake2s.eu.nicehash.com:3361 -dwal YourBtcWalletAddress -dcoin blake2s

B2S New Jobs getting in but speed is always zero. ETH Speed is on 39MH/s on vega 56, with claymore it was 41.That's OK for me and it looks stable.
thx

Hy,

I'm new at Phoenix, Hashrate is lower than on claymore but it works. So I try for dual mining, but didn't get a hashrate on the secand coin.
Copy the command line from the readme for dual mining and added my adresses.
Any tips, thx