Search content
Sort by
Showing 16 of 16 results by abdullaziz.said
I mined etn using fairhash and overclocked only to 475hz. My rate was almost always 276 Kh/s. I think it was at 150 MH at the time, didn't pay to close attention. I was doing around $28. a day. Now I'm experimenting with BCN from the UK. It's a pool that will share in the block if you find it. Already happened today. Both are low price coins so nothing earth shattering. thx for the info.
Was that rate on the X3 dashboard or the mining pool website?
...
For the Bytecoin UK site that I'm using it's 139.8 MH/s for the Pool, and 367.5 MH/s for the network hash rate. From here--> https://bytecoin.uk/#
Neither of those are your hashrate, both of those are specific to the pool/network. Your hashrate is below, in the section below where you enter your address and see your payouts and stuff.
I just started experimenting with DERO. My rate there is 300Kh/s with diff set at 6,000,000 The miner reports 274Kh/s while the dero web page reports my rate @ 420Kh/s
can you give me pool link and how did you link it to antMiner X3
To those that have started to mine.
How much watts is it pulling? Any chance we could just run the APW3++ run on US 110 V?
APW3++ only 1200 watts on 110v. Even if bitmain overstated the draw, which they usually do....you would be cutting it awfully close. How much watts is it pulling? Any chance we could just run the APW3++ run on US 110 V?
Can someone post the power consumption details about A3 please? Really curious about a possibility to run Antminer A3 on 110V using APW3++....
Tested with 240V. Power is 1450W on wall
On stock clock
Frequency running at 600.. temp is good, very stable miner..
What pool are you on ? How much is the miner earning per hour. Could you please share the configuration page, graying out confidential information. Thanks.
my pool is siamining.com
this is my configuration
https://i.imgur.com/TUL7OeM.png
https://i.imgur.com/rwHvTMm.png
Hey dt, what power supply unit are you using and are you on 220 or 120 volt?
i'm using this one https://shop.bitmain.com/productDetail.htm?pid=00020171107201722598O4kMWe280658
and i'm on 220V
UPS is asking for $72 import fee. Anybody else got the same?
All and all with my sound proofing box and such this ended up $3.3k. I hope I make it back lol.
All and all with my sound proofing box and such this ended up $3.3k. I hope I make it back lol.
Yes, I paid it too. I paid it twice
for x2 A3. I have also paid for L3 and S9 as well, however its typically in 50's but for A3, its 72$.On to different topic,
I just now plugged in one of my A3 in Siamining, Is there a option to set the payout threshold ?.
Has anyone gotten the A3 to work on NiceHash??? It wont let me at all! But i do have connection on Luxor: http://mining.luxor.tech/
Luxor is supporting the soft fork don't give them your money.
still doesn't work, said dead pool when i put it in pool 2 and 3 if i put it in 1 pool it won't connect
i can help you with team viewer if you want
i put the original information back in like it was and it connected so it has to be something Im putting in
stratum+tcp://stratum-sc.antpool.com:443
antminer1
123
stratum+tcp://stratum-sc.antpool.com:443
antminer1
123
use this link only us-east.siamining.com:3333
nothing else (us-east.siamining.com:3333)
Hi Abdulaziz
How did you setup the password on the A3?
What's your current earning?
Thanks,
check this out
my pool is siamining.com
this is my configuration
https://i.imgur.com/TUL7OeM.png
https://i.imgur.com/rwHvTMm.png
password is x in my case
my earning is amazing.
i put the original information back in like it was and it connected so it has to be something Im putting in
stratum+tcp://stratum-sc.antpool.com:443
antminer1
123
stratum+tcp://stratum-sc.antpool.com:443
antminer1
123
use this link only us-east.siamining.com:3333
nothing else (us-east.siamining.com:3333)
I could not get nicehash or nanopool to work.
my pool is siamining.comthis is my configuration
https://i.imgur.com/TUL7OeM.png
https://i.imgur.com/rwHvTMm.png
To those that have started to mine.
How much watts is it pulling? Any chance we could just run the APW3++ run on US 110 V?
APW3++ only 1200 watts on 110v. Even if bitmain overstated the draw, which they usually do....you would be cutting it awfully close. How much watts is it pulling? Any chance we could just run the APW3++ run on US 110 V?
Can someone post the power consumption details about A3 please? Really curious about a possibility to run Antminer A3 on 110V using APW3++....
Tested with 240V. Power is 1450W on wall
On stock clock
Frequency running at 600.. temp is good, very stable miner..
What pool are you on ? How much is the miner earning per hour. Could you please share the configuration page, graying out confidential information. Thanks.
my pool is siamining.com
this is my configuration
https://i.imgur.com/TUL7OeM.png
https://i.imgur.com/rwHvTMm.png
Re: Bitmain just announced the AntMiner A3 - 815GH/s Siacoin miner - Blake(2b)
could you please tell me how to configure it, i will receive mine day after tomorrow
Select the server address that is closest to you followed by ":" and 3333. I am using SC address from Bittrex as my worker (add .worker name if you like) and password x.
https://siamining.com/help
did you finish the youtube review video
Is there an antpool for the a3?
not yetsome news about siamining.com that it's work
Anyone getting a "Shipment exception" message on their Fedex tracking? My scheduled delivery is still showing Thursday (1/25) but I've never seen this message before.
i got it then it's updated the same day
Re: Bitmain just announced the AntMiner A3 - 815GH/s Siacoin miner - Blake(2b)
could you please tell me how to configure it, i will receive mine day after tomorrow
HERE WE GO!!!!
siamining.com is working well. the problem i think was miningpool hub
THere is the option to overclock, going to monitor the miner for a little while longer then give the overclock a go. You can also control fan speed
siamining.com is working well. the problem i think was miningpool hub
THere is the option to overclock, going to monitor the miner for a little while longer then give the overclock a go. You can also control fan speed
could you please tell me how to configure it with siamining.com
is there are any registration cuze i can't see any registration on siamining web site
so i have to take the pool link :port and my wallet address from bittrex and then what
In the Bitmain's site the PSU is marked as shipped but in the Email I received I see the status is:
Shipped quantity(PSU): 0
Shipped quantity(A3) : 1
Is it possible that the PSU is inside the pack?
On the invoice in the email it is also marked only the miner?
Shipped quantity(PSU): 0
Shipped quantity(A3) : 1
Is it possible that the PSU is inside the pack?
On the invoice in the email it is also marked only the miner?
it will be updated, its happen with me