Search content
Sort by
Showing 20 of 20 results by chase.pxelplus
Re: Antminer D3 Blissz firmware (21/11 update available!)
Well this looks my stable peak - https://imgur.com/a/v7X9J im worried abou that last chip having 77 temperature do u think it will be alright ?
a really nice overclock. What are your voltage settings? Your temperatures are perfectly fine. I can't give you any guarantee, but if you have cheap electricity and can handle the noise I would let it run at these speeds.
If you're worried about the last chain, you can clock that chain down a bit to i.e 575 Mhz and lower the voltage a bit too to get it to ~73 degrees as well. Let chain 1 and 2 run at the settings as they are now.
I would reduce the frequency a little for the last chain which seems always to have higher temperatures (I have 4 D3s and I see the same phenomenon). This is probably due to the way the fans are pushing the air through the body of the miner, which causes more air to flow to one side, affecting the other side where the 3rd chain is located. 77 deg. is ok, but I would not let it run 24/7. The highest temp. I would run any of my D3 miners on a 24/7 basis is 75 deg. C. and even then, one would get more HW errors than with lower temperatures.
also im not getting HW errors after 1 hour i got just 4 HW only on middle chain What is your voltage setting for the 3 chains?
Re: Antminer D3 Blissz firmware (21/11 update available!)
I updated the firmware using the link in page 31 (21/11 recommended UPDATE) and set the following
Fan percentage to 30%
Global settings
Frequency: 431M
Asic volatge: lowest
Chain 1
Frequency: 462M
Asic volatge: 1
Chain 2
Frequency: Use global
Asic volatge: Use global
Chain 3
Frequency: 425M
Asic volatge: 1
Been running for about 1hr and I have a HW 5 in chain 1 with discarded 2,177 on my main pool. Is this normal? What's the meaning of HW 5 and discarded? I'm new on using an asic miner.
https://drive.google.com/file/d/1WVTntaP57RZELlobqCan09wAbBjTyyPv/view
Fan percentage to 30%
Global settings
Frequency: 431M
Asic volatge: lowest
Chain 1
Frequency: 462M
Asic volatge: 1
Chain 2
Frequency: Use global
Asic volatge: Use global
Chain 3
Frequency: 425M
Asic volatge: 1
Been running for about 1hr and I have a HW 5 in chain 1 with discarded 2,177 on my main pool. Is this normal? What's the meaning of HW 5 and discarded? I'm new on using an asic miner.
https://drive.google.com/file/d/1WVTntaP57RZELlobqCan09wAbBjTyyPv/view
Something's wrong with your pool, i wouldn't suggest you use zpool, not reliable, i still remember that 20% hidden fees, use granatgas-pool instead.
Thanks, I'll switch to granatgas-pool. It seems https://granatgas-pool.info/ is down.
Try this http://granatgas-pool.info/ without s
Thanks, it's working
Re: [ANN][POOL] granatgas-pool x11 and scrypt multipool
i can't connect to https://granatgas-pool.info/ any reasons why?
Update: Already working. I just need to delete the s in http
Update: Already working. I just need to delete the s in http
Re: Antminer D3 Blissz firmware (21/11 update available!)
I updated the firmware using the link in page 31 (21/11 recommended UPDATE) and set the following
Fan percentage to 30%
Global settings
Frequency: 431M
Asic volatge: lowest
Chain 1
Frequency: 462M
Asic volatge: 1
Chain 2
Frequency: Use global
Asic volatge: Use global
Chain 3
Frequency: 425M
Asic volatge: 1
Been running for about 1hr and I have a HW 5 in chain 1 with discarded 2,177 on my main pool. Is this normal? What's the meaning of HW 5 and discarded? I'm new on using an asic miner.
https://drive.google.com/file/d/1WVTntaP57RZELlobqCan09wAbBjTyyPv/view
Fan percentage to 30%
Global settings
Frequency: 431M
Asic volatge: lowest
Chain 1
Frequency: 462M
Asic volatge: 1
Chain 2
Frequency: Use global
Asic volatge: Use global
Chain 3
Frequency: 425M
Asic volatge: 1
Been running for about 1hr and I have a HW 5 in chain 1 with discarded 2,177 on my main pool. Is this normal? What's the meaning of HW 5 and discarded? I'm new on using an asic miner.
https://drive.google.com/file/d/1WVTntaP57RZELlobqCan09wAbBjTyyPv/view
Something's wrong with your pool, i wouldn't suggest you use zpool, not reliable, i still remember that 20% hidden fees, use granatgas-pool instead.
Thanks, I'll switch to granatgas-pool. It seems https://granatgas-pool.info/ is down.
Re: Antminer D3 Blissz firmware (21/11 update available!)
I updated the firmware using the link in page 31 (21/11 recommended UPDATE) and set the following
Fan percentage to 30%
Global settings
Frequency: 431M
Asic volatge: lowest
Chain 1
Frequency: 462M
Asic volatge: 1
Chain 2
Frequency: Use global
Asic volatge: Use global
Chain 3
Frequency: 425M
Asic volatge: 1
Been running for about 1hr and I have a HW 5 in chain 1 with discarded 2,177 on my main pool. Is this normal? What's the meaning of HW 5 and discarded? I'm new on using an asic miner.
https://drive.google.com/file/d/1WVTntaP57RZELlobqCan09wAbBjTyyPv/view
Fan percentage to 30%
Global settings
Frequency: 431M
Asic volatge: lowest
Chain 1
Frequency: 462M
Asic volatge: 1
Chain 2
Frequency: Use global
Asic volatge: Use global
Chain 3
Frequency: 425M
Asic volatge: 1
Been running for about 1hr and I have a HW 5 in chain 1 with discarded 2,177 on my main pool. Is this normal? What's the meaning of HW 5 and discarded? I'm new on using an asic miner.
https://drive.google.com/file/d/1WVTntaP57RZELlobqCan09wAbBjTyyPv/view
Hi everyone. Is this temp safe for D3's? I'm new using asic miner. I set my frequency to 462 and 70% fan speed. Is it normal to hear a beeping sound?
Click for image
Click for image
Re: [ANN][ICO] ⚡ Electroneum ⚡ Token Sale Sept 14th Mobile Mining Crypto Coin
HOW TO CHECK PAPER WALLET BALANCE ........real balance not pool balance ........
and how to transfer paper wallet balance to exchange..... have any option
and how to transfer paper wallet balance to exchange..... have any option
Wow. Went for sleep a couple of hours ago. Its soo salty in here.
Just a lil hint: ETN software is XMR software. ALL monero guides should work with ETN.
To actually check your wallet balance do the following as stated in the XMR guide ( https://getmonero.org/resources/user-guides/restore_from_keys.html )
Be sure to have your paperwallet available with all 3 adresses (public, private view, private share!)
STEP 1
Goto https://downloads.electroneum.com/
Download the Windows Direct Miner (ZIP)
Unzip it!
STEP 2
Press win_button + R
A lil window will appear, type CMD and press ENTER
STEP 3
Browse to the root directory of the unzipped windows miner you just loaded.
Example starting in C:\Users\Username>
Type: cd Downloads\win-x64-0.11.0.0
(Going the wrong path? cd.. takes you back a step.)
STEP 4
Check with "dir" command that files are present.
Now we are going to restore the wallet. Type the following: electroneum-wallet-cli --generate-from-keys New_Wallet_Name.abc
Choose whatever name you want for New_Wallet_Name.abc.
If typed correctly it'll ask for Standard address. Copy&paste yourpublic view key. After that your private spend and view key aswell.
Make sure to copy them to notepad before and delete every SPACE you might find. Otherwise it'll prompt you with an error.
Last step is to secure it with a strong password. Dont miss out on this!
STEP 5
View your wallet.
Navigate into your unzipped folder, its important to have the deamon running. Start electroneumd.exe. Keep it open, unblock it if firewall promp comes up.
Now start the electroneum-wallet-cli.exe
Its gonna ask for the wallet file name. The name you have choosen in Step 4. Type it. In this case: New_Wallet_Name.abc
It'll ask for the password you've choosen before. Type it in.
If done correctly it'll synch with the blockchain. Might take a few.
Once thats done it'll show you all your transactions aswell as your balance. You are now free to update it whenever you want. Just type the following: refresh.
Thats it. You now have one less reason to complain.
You dont feel comfi having your full access wallet running? Follow this guide afterwards: https://getmonero.org/resources/user-guides/view_only.html
Just a lil hint: ETN software is XMR software. ALL monero guides should work with ETN.
To actually check your wallet balance do the following as stated in the XMR guide ( https://getmonero.org/resources/user-guides/restore_from_keys.html )
Be sure to have your paperwallet available with all 3 adresses (public, private view, private share!)
STEP 1
Goto https://downloads.electroneum.com/
Download the Windows Direct Miner (ZIP)
Unzip it!
STEP 2
Press win_button + R
A lil window will appear, type CMD and press ENTER
STEP 3
Browse to the root directory of the unzipped windows miner you just loaded.
Example starting in C:\Users\Username>
Type: cd Downloads\win-x64-0.11.0.0
(Going the wrong path? cd.. takes you back a step.)
STEP 4
Check with "dir" command that files are present.
Now we are going to restore the wallet. Type the following: electroneum-wallet-cli --generate-from-keys New_Wallet_Name.abc
Choose whatever name you want for New_Wallet_Name.abc.
If typed correctly it'll ask for Standard address. Copy&paste yourpublic view key. After that your private spend and view key aswell.
Make sure to copy them to notepad before and delete every SPACE you might find. Otherwise it'll prompt you with an error.
Last step is to secure it with a strong password. Dont miss out on this!
STEP 5
View your wallet.
Navigate into your unzipped folder, its important to have the deamon running. Start electroneumd.exe. Keep it open, unblock it if firewall promp comes up.
Now start the electroneum-wallet-cli.exe
Its gonna ask for the wallet file name. The name you have choosen in Step 4. Type it. In this case: New_Wallet_Name.abc
It'll ask for the password you've choosen before. Type it in.
If done correctly it'll synch with the blockchain. Might take a few.
Once thats done it'll show you all your transactions aswell as your balance. You are now free to update it whenever you want. Just type the following: refresh.
Thats it. You now have one less reason to complain.
You dont feel comfi having your full access wallet running? Follow this guide afterwards: https://getmonero.org/resources/user-guides/view_only.html
credit to ZineX
Re: [ANN][ICO] ⚡ Electroneum ⚡ Token Sale Sept 14th Mobile Mining Crypto Coin
can anyone tell me where you find your etn address?
There is no etn address for the ico yet. Miners used the paper wallet for their address.
Re: [ANN][ICO] ⚡ Electroneum ⚡ Token Sale Sept 14th Mobile Mining Crypto Coin
the price will dump to the core of the earth
because newbies be like, i cant understand mining, fuck why cant i transfer my coins? shit its on cryptopia how can i trade, fuck this im gonna dump this coin.
ahaha once these cry babies sold all their coins thats when the engine of our rocket will start
because newbies be like, i cant understand mining, fuck why cant i transfer my coins? shit its on cryptopia how can i trade, fuck this im gonna dump this coin.
ahaha once these cry babies sold all their coins thats when the engine of our rocket will start
Yeah
By watching the market history soon it will go sky rocket. Many people want this coin badly. I'll stick mine and HODL Re: [ANN][ICO] ⚡ Electroneum ⚡ Token Sale Sept 14th Mobile Mining Crypto Coin
Anybody having an issue with transferring? I've had a pending transfer to cryptopia for over 2 hours now. I can see it in the explorer but nothing is happening. Just sits on pending on the wallet cli.
Did you send with paymentID? that is required in cryptopia.
Yes I did. command was Transfer
It's just sitting there. I can lookup the stealth address in the explorer.
it should be
transfer
is the priority of the transaction. The higher the priority, the higher the fee of the transaction. Valid values in priority order (from lowest to highest) are: unimportant, normal, elevated, priority. If omitted, the default value (see the command "set priority") is used.
is the number of inputs to include for untraceability.
I tried to transfer a small amount to see how many minutes or hours it will took (not gonna sell, hodl
). I set my priority to normal and the ring_size to 2. It took 30 minutes to transfer it to cryptopia.Re: [ANN][ICO] ⚡ Electroneum ⚡ Token Sale Sept 14th Mobile Mining Crypto Coin
Wow. Went for sleep a couple of hours ago. Its soo salty in here.
Just a lil hint: ETN software is XMR software. ALL monero guides should work with ETN.
To actually check your wallet balance do the following as stated in the XMR guide ( https://getmonero.org/resources/user-guides/restore_from_keys.html )
Be sure to have your paperwallet available with all 3 adresses (public, private view, private share!)
STEP 1
Goto https://downloads.electroneum.com/
Download the Windows Direct Miner (ZIP)
Unzip it!
STEP 2
Press win_button + R
A lil window will appear, type CMD and press ENTER
STEP 3
Browse to the root directory of the unzipped windows miner you just loaded.
Example starting in C:\Users\Username>
Type: cd Downloads\win-x64-0.11.0.0
(Going the wrong path? cd.. takes you back a step.)
STEP 4
Check with "dir" command that files are present.
Now we are going to restore the wallet. Type the following: electroneum-wallet-cli --generate-from-keys New_Wallet_Name.abc
Choose whatever name you want for New_Wallet_Name.abc.
If typed correctly it'll ask for Standard address. Copy&paste yourpublic view key. After that your private spend and view key aswell.
Make sure to copy them to notepad before and delete every SPACE you might find. Otherwise it'll prompt you with an error.
Last step is to secure it with a strong password. Dont miss out on this!
STEP 5
View your wallet.
Navigate into your unzipped folder, its important to have the deamon running. Start electroneumd.exe. Keep it open, unblock it if firewall promp comes up.
Now start the electroneum-wallet-cli.exe
Its gonna ask for the wallet file name. The name you have choosen in Step 4. Type it. In this case: New_Wallet_Name.abc
It'll ask for the password you've choosen before. Type it in.
If done correctly it'll synch with the blockchain. Might take a few.
Once thats done it'll show you all your transactions aswell as your balance. You are now free to update it whenever you want. Just type the following: refresh.
Thats it. You now have one less reason to complain.
You dont feel comfi having your full access wallet running? Follow this guide afterwards: https://getmonero.org/resources/user-guides/view_only.html
Just a lil hint: ETN software is XMR software. ALL monero guides should work with ETN.
To actually check your wallet balance do the following as stated in the XMR guide ( https://getmonero.org/resources/user-guides/restore_from_keys.html )
Be sure to have your paperwallet available with all 3 adresses (public, private view, private share!)
STEP 1
Goto https://downloads.electroneum.com/
Download the Windows Direct Miner (ZIP)
Unzip it!
STEP 2
Press win_button + R
A lil window will appear, type CMD and press ENTER
STEP 3
Browse to the root directory of the unzipped windows miner you just loaded.
Example starting in C:\Users\Username>
Type: cd Downloads\win-x64-0.11.0.0
(Going the wrong path? cd.. takes you back a step.)
STEP 4
Check with "dir" command that files are present.
Now we are going to restore the wallet. Type the following: electroneum-wallet-cli --generate-from-keys New_Wallet_Name.abc
Choose whatever name you want for New_Wallet_Name.abc.
If typed correctly it'll ask for Standard address. Copy&paste yourpublic view key. After that your private spend and view key aswell.
Make sure to copy them to notepad before and delete every SPACE you might find. Otherwise it'll prompt you with an error.
Last step is to secure it with a strong password. Dont miss out on this!
STEP 5
View your wallet.
Navigate into your unzipped folder, its important to have the deamon running. Start electroneumd.exe. Keep it open, unblock it if firewall promp comes up.
Now start the electroneum-wallet-cli.exe
Its gonna ask for the wallet file name. The name you have choosen in Step 4. Type it. In this case: New_Wallet_Name.abc
It'll ask for the password you've choosen before. Type it in.
If done correctly it'll synch with the blockchain. Might take a few.
Once thats done it'll show you all your transactions aswell as your balance. You are now free to update it whenever you want. Just type the following: refresh.
Thats it. You now have one less reason to complain.
You dont feel comfi having your full access wallet running? Follow this guide afterwards: https://getmonero.org/resources/user-guides/view_only.html
credit to ZineX. Follow the steps to check your mined etn
Re: [ANN][ICO] ⚡ Electroneum ⚡ Token Sale Sept 14th Mobile Mining Crypto Coin
I was watching the market history in cryptopia. It was like a Christmas light red green green red green HODL guys.
HODL guys. how do we list on cryptopia mate?
Just register and put the coins over?
yes just register and transfer the coin via cli
Re: [ANN][ICO] ⚡ Electroneum ⚡ Token Sale Sept 14th Mobile Mining Crypto Coin
Hello, I am using cryptonote-easy-miner_v0.0.3 and connect to http://electroneum.hashparty.io/ working perfectly and you can view your hasrate and your earning on the dashboard.
Best regards
Okane Satoshi
Best regards
Okane Satoshi
I tried to use the mining pool and the miner (cuda) provided in their site but my hash went down from 4534 h/s to 2467 h/s. Went back on the old miner and pool that I'm using.
Re: [ANN][ICO] ⚡ Electroneum ⚡ Token Sale Sept 14th Mobile Mining Crypto Coin
online wallet : no
exchanges : no
mobile mining : no
pc windows mining : no
exchanges : no
mobile mining : no
pc windows mining : no
Yeah, great launch.
what do you mean by pc windows mining? I've been mining for 5 hours using cpu and gpu.
Re: [ANN][ICO] ⚡ Electroneum ⚡ Token Sale Sept 14th Mobile Mining Crypto Coin
gpu mining now. I had a hard time finding the ccminer to run it. Download the ccminer 2.2 but it won't run. Browsed my old files and found a ccminer but I don't know what version it is. Running at 4538 H/s
What GPU and how many?
3x asus strix 1080ti and 4x palit jetstream 1070
Re: [ANN][ICO] ⚡ Electroneum ⚡ Token Sale Sept 14th Mobile Mining Crypto Coin
gpu mining now. I had a hard time finding the ccminer to run it. Download the ccminer 2.2 but it won't run. Browsed my old files and found a ccminer but I don't know what version it is. Running at 4538 H/s
Hi everyone!
We need to decide on the final coin logo.
https://docs.google.com/forms/d/e/1FAIpQLSfNCpx4MxOe9nQV9DtyhPr0tcLwJbwpY_q0IvJet5bP9XjOoQ/viewform?usp=sf_link
We need to decide on the final coin logo.
https://docs.google.com/forms/d/e/1FAIpQLSfNCpx4MxOe9nQV9DtyhPr0tcLwJbwpY_q0IvJet5bP9XjOoQ/viewform?usp=sf_link
I suggest you display these logos at 16x16 resolution, which is how they would appear in CoinMarketCap for example (as well as other places). People will rarely view the logos at the size shown on the form. These logos/icons need to be highly reduceable. I've done a quick job here, and the logos below show at approximately 16x16:
https://i.imgur.com/NNpBEro.png
Nice logos. Logo 2 for darker canvas and Logo 4 for white canvas. Done voting in google docs link